ATH-Heinl 2-post lift ATH Matrix Lift 2.65/2.75XL

Language settings
You can set the system language of the lift in this menu item.
Parameters
In this menu item, you can set the various parameters of the lift.
Changing the units
Max. Height difference of the support arms when lifting
The preset height difference dH0 is 30 mm. If this is exceeded, the solenoid valve of the higher
support arm closes until both support arms are at the same height again. As soon as this is the
case, the solenoid valve opens again.
Max. Height difference of the support arms when lowering
The preset height difference dH1 is 30 mm. If this is exceeded, the solenoid valve of the lowered
support arm closes until both support arms are at the same height again. As soon as this is the
case, the solenoid valve opens again.
Max. Lifting height Hmax
The preset value is 2000 mm.
CE / Safety height
The preset value is 300 mm.
This function can be switched on or off by pressing the round indicator light.
Gray indicator light: The value has no function
Red indicator light: The support arms are raised by this value before the lift is lowered.
Current height of the support arms
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
Release date: 26.01.2024 / Product manufacturer ATH-Heinl GmbH & Co. KG
137