26.01.2024 Views

ATH-Heinl 2-post lift ATH Matrix Lift 2.65/2.75XL

ATH-Heinl 2-post lift ATH Matrix Lift 2.65/2.75XL

ATH-Heinl 2-post lift ATH Matrix Lift 2.65/2.75XL

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

1. Go to the start screen and select “Settings”. Enter the password for the calibration.<br />

2. Select “Calibration” and the above screen appears.<br />

3. Remove any load from the <strong>lift</strong> before starting the calibration.<br />

4. Select a reference point on the <strong>lift</strong> truck.<br />

5. Lower the <strong>lift</strong> completely and measure the distance from the floor to your reference point.<br />

6. Enter the respective value of the main or secondary column at H0I or H1I.<br />

7. Raise the <strong>lift</strong> to the maximum <strong>lift</strong>ing height and measure the distance from the ground to your reference<br />

point.<br />

8. Enter the respective value of the main or secondary column at H0h or H1h.<br />

9. Press “Exit” to save the entered values and end the calibration.<br />

ü<br />

The altitude values displayed should now correspond exactly to the values you measured at the reference<br />

point.<br />

® Copyright <strong>ATH</strong>-<strong>Heinl</strong> GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved<br />

Release date: 26.01.2024 / Product manufacturer <strong>ATH</strong>-<strong>Heinl</strong> GmbH & Co. KG<br />

139

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!