SERVICE MANUAL SERIES 320 XR - Precisa

Series 320 XRInstalling the new flexure sheets5. Installing the new flexure sheets5.1 Removing the old flexure sheets1. Take out all screws from the flexure holder and remove the old flexure sheets together with bases.5.2 Installing the new flexure sheets1. Place a flexure holder on the assembly plate [1/D3] as in fig. 5 on page D9.2. Place 4 new flexure sheets part-no. 320-2044 carefully on the assembly plate as in fig. 5 onpage D9 → the slot of the sheet is always on the flexure holder.3. Place 4 bases (7/B2) on the flexure sheet and screw these tightly to the flexure holder with 4screws.4. Take the complete flexure holder carefully off the assembly plate → do not touch the flexures!5. Prepare the second flexure holder in the same way.fig. 5Mark upside-down!Precisa Gravimetrics AG Index b2 D9