Pistole P2000 SK P2000 SK Pistol - Waffen Braun

Replacement of backstrapinsertTwo backstrap inserts of differentheights allow an optimumadaptation to different hand sizes.In order to replace thebackstrap insert, drift out clampingpin laterally using a Ø 2.8mm drift punch.Attention: The backstrap is underthe spring tension of thehammer spring.Slide the backstrap insert to beinstalled up into receiver guidefrom below. The hammer springguided on the hammer strut isguided in the support inside thebackstrap.Slide up backstrap insert intothe final position against thepressure of the hammer springand laterally drive in clampingpin.Replacement of backstrap insert59