Becker Centronic MemoControl MC511 Anleitung - auf enobi.de

Weitere Magazine

Empfehlungen

Info

Assembly and Operating InstructionsProgramming the remote control1) Learning the master transmittera) Put receiver into learn modeNotePlease refer to the operating instructions for the receiver.• Switch off the receiver’s power supply and reconnect after 5 seconds.or• Activate the “Learn” key or the radio-controlled receiver switch.The receiver will then be in “Learn” mode for 3 minutes.b) Learn master transmitterWhen the receiver is in “Learn” mode, the learn button is to be pressed untilthe receiver indicates that the learn process has been successfully completed.The learn process is now complete.2) Learning additional transmittersa) Press the learn button of the master transmitter until acknowledgement isgiven by the receiver.b) Now press the learn button of the new transmitter until acknowledgement isgiven by the receiverc) Then press the learn button of the new transmitter to be learnt once again.The receiver will indicate when the learn process has been successfully completed.The maximum radio range is up to 25 m indoors and up to 350 m in the open.16
7Installing the wall mount1626• Before installing in the position required,check that the transmitterand receiver are functioning properly.• Fix the mount to the wall with the twoscrews provided.32Changing the batterie1. Lift the wall transmitter out of theholder in upward direction.2. Take out the batterie.3. Insert the new batterie in the correctposition.deenfrnl++CleaningClean the device with a damp cloth only. Do not use a cleansing agent since thiscould damage the plastic.17
Seite 1 und 2: CentronicMemoControl MC511deenfrnlM
Seite 3 und 4: SommaireGénéralités ............
Seite 5 und 6: Bestimmungsgemäße VerwendungDer M
Seite 7 und 8: Programmieren der Fahrzeiten1. Ggf.
Seite 9 und 10: 7Montage Wandhalterung1626• Prüf
Seite 12 und 13: Assembly and Operating Instructions
Seite 20 und 21: Notice de montage et d’utilisatio
Seite 28 und 29: Montage- en gebruiksaanwijzingAlgem
Seite 30 und 31: Montage- en gebruiksaanwijzingVerkl
Seite 32 und 33: Montage- en gebruiksaanwijzingProgr
Seite 34 und 35: Montage- en gebruiksaanwijzingTechn
Seite 36: Becker-Antriebe GmbH35764 Sinn/Germ

Becker Centronic MemoControl MC511 Anleitung - auf enobi.de

Erfolgreiche ePaper selbst erstellen

Template löschen?

Als Template speichern?