Becker Centronic MemoControl MC511 Anleitung - auf enobi.de

Assembly and Operating InstructionsTechnical dataNominal voltage3 V DCType of batteryCR2032Protection class IP 20Permissible surrounding temperature -10 to +55 °CRadio frequency868.3 MHzWhat to do if ...?Problem Cause RemedyDrive is not functioning,transmission controllight is not lit.Drive is not functio-ning,transmission controllight is lit.Transmission controllight is lashing.Drive does operate in a24 hour cycle.Switching times differfrom those programmed1. Battery is discharged.2. Battery is incorrectlyinserted.1. Receiver outside theradio range.2. Transmitter is notprogrammed in thereceiver.Battery is running out.1. Sliding switch not inthe manual position2. Operating time notprogrammedPower failure affectingthe tubular drive1. Insert new battery.2. Insert battery correctly.1. Reduce distance tothe receiver.2. Programme transmitter.Insert new batterie.1. Set sliding switch tothe clock position2. Programme operatingtimeReprogramme theswitching times18