Montageanleitung Fangstange - Dehn + Söhne Blitzschutzsysteme
Montageanleitung Fangstange - Dehn + Söhne Blitzschutzsysteme
Montageanleitung Fangstange - Dehn + Söhne Blitzschutzsysteme
Erfolgreiche ePaper selbst erstellen
Machen Sie aus Ihren PDF Publikationen ein blätterbares Flipbook mit unserer einzigartigen Google optimierten e-Paper Software.
2. Air-termination rods with concrete block<br />
The air-termination rods listed below (see table 2) are supposed to protect roof superstructures<br />
and can be adjusted to roof inclinations up to max. 10 degrees.<br />
The air-termination rods are dimensioned for wind speeds up to 145 km/h and 161 km/h<br />
(wind load zone II + III in accordance with DIN 4131).<br />
2.1Installation<br />
When installing the concrete block, it has to be observed that the braces and the continuous<br />
concrete recess of the concrete blocks are aligned in a straight line. Thus, maximum stability<br />
of the brace frame and the air-termination rod is achieved when driving in the wedges (see<br />
Fig. 2, page 4).<br />
2.1.1 Concrete block<br />
For mechanical stabilisation of the air-termination rod and protection against possible wind<br />
load effects, a concrete block has to be installed on every bracing.<br />
Depending on the total length of the relevant air-termination rod, a concrete block with a<br />
weight of 8.5 kg or 17 kg is installed per brace (see table 2 and Fig. 2, page 4).<br />
Note:<br />
For additional protection of roof sheetings it is advisable to use ground plates, Part No. 102<br />
050 or 102 060, when installing the concrete blocks (see Fig. 2, page 4).<br />
The air-termination system may not be installed on sheet metal roofs!<br />
Complete airtermination-rod<br />
Part No. 105 425<br />
Length: 2500 mm<br />
Part No. 105 430<br />
Length: 3000 mm<br />
Part No. 105 435<br />
Length: 3500 mm<br />
Part No. 105 401<br />
Air-terminationrod<br />
with a<br />
diameter of<br />
Æ 16 / 10 mm<br />
Part No. 103 221<br />
Length: 2000 mm<br />
Part No. 103 221<br />
Length: 2000 mm<br />
Part No. 103 231<br />
Length: 2500 mm<br />
Tripod<br />
Lower part of the<br />
air-termination<br />
rod / aluminium tube<br />
Æ 22 x 4 mm<br />
Part No. 105 405<br />
Length: 500 mm<br />
Part No. 105 410<br />
Length: 1000 mm<br />
Part No. 105 410<br />
Length: 1000 mm<br />
Page 3<br />
Concrete block<br />
per brace<br />
Brace length / radius<br />
R = 250 mm<br />
Part No. 102 075<br />
1 x concrete block 8,5 kg<br />
Part No. 102 010<br />
1 x concrete block 17 kg<br />
Part No. 102 010<br />
1 x concrete block 17 kg<br />
Table 2 Air-termination rods from 2500 bis 3500 mm<br />
MO_1712_DE_GB_1209_057867