Montageanleitung Fangstange - Dehn + Söhne Blitzschutzsysteme

2.3. Adjustment of the air-termination rod in case of roof inclinations up to an inclination angle
of 10°
2.3.1Adjustment of the adapter
The adapter attached to the brace frame allows the installation of self-supporting air-termination
rods with a diameter of 22 mm. This adapter compensates air-termination rods in case of
roof inclinations or slopes up to an inclination angle of 10° (see Fig. 2.3).
Depending on the inclination angle, the air-termination rod (Æ 22 mm; aluminium tube) is
inserted into the adapter and the four M10 locking bolts are tightened.
Moreover, the four hexagon nuts have to tightened against the adapter. The specified tightening
torques have to be observed (see Fig. 2.2, page 6 and Fig. 2.3, page 7).
M10 hexagon nut
max. 10°
Fig. 2.3 Adjustment of the adapter
Page 7
lower part of the
air-termination rod
Æ 22 x 4 mm; aluminium tube
tightening torque for the
M10 locking bolt;
25 Nm
MO_1712_DE_GB_1209_057867