What's New in StruCad V12 - Computer Control Systems

The World’s Leading 3-D Structural Steel Detailing System
V12 Bug Fixes & Enhancements
Type No. Description
Analysis F0033006 Portal BS5950 Horizontal Load Cases 1-3 Removed and Disabled.
Analysis F0033003 Regression capability added. It is now possible to save all output
information for comparison with later versions.
Analysis F0032251 Fixed problem with load cases dialog not appearing when selected
from the analysis menu.
Analysis F0032224 Fixed issue with the member check being different for symmetrical
twin span frames over 35m when the loading was the same.
MatRTF F0032838 Various enhancements to the Dutch language version of MatRTF.
Macro CPAS macro has been corrected to work at column tops requiring
a fillet to the corners.
Macro CPA macro has been corrected to use the right bolts when
multiple member are present. The slot which did not drill through
the member correctly has been fixed.
Macro FP macro has been modified to allow the bottom flange to be
notched, coped or not affected.
Macro FEP Altered GUI macro interface to be more user friendly
Macro F0032214 Albion ASPR macro no longer applies a slotted hole for cleader
angles as this is no longer required.
Macro F0032778 Kingspan (Ireland) : KSEBC & KSMC updated to support need for
back marks and holing arrangements.
Macro F0032777 Kingspan Metlcon : Modifed multichannel sizes and naming
conventions.
ColdCam F0032208 Albion ColdCam V3 updated to correct various problems and
include updated section references.
ColdCam F0032778 Kingspan (Ireland) : ColdCam database updated to reflect macro
changes.
ColdCam F0032778 Kingspan Metlcon : ColdCam database updated to reflect section
size and naming convention changes.
DPS F0032669 Fixed problem with Anchor Bolt Plan where grid lines are
positioned incorrectly or grouped in the bottom left corner.
Macro F0032577 Vern Macro now supports UB support member profiles.
Macro F0032577 Vern Macro Setup file modified for improved clarity.
MatRTF F0032579 Fixed problem with section sizes being sorted numerically instead
of by the order in the section catalog.
DPS F0032382 Fixed problem with AutoNest crash
2D Cad F0032285 Full support for Chinese characters added. Various issues with
character spacing and redundant characters have been resolved.
2D Cad Various issues resolved with the DXFIN / DXFOUT command
2D Cad Fixed issues with plotting DXF files containing text and line widths
being ignored.
Shapes F0032146 Added the CREB7D shape. This is the same as CREB7 but allows
the bottom lip to point down.
Page 20 What’s New in StruCad V12