Download - Fischer Connectors

Coax High Voltage
Dimensions
Cable Mounted Plugs
■ S/SE and SV/SVE Body Styles
Type A B D D1 dmax
1
Unsealed Sealed
102 A 018
Z
102 A 025
Z
103 A 023
Z
104 A 010
Z
105 A 004
Z
105 A 005
Z
1) Cable screen and jacket (e.g. RG-58) are retained by hex-crimp to the plug shell.
2) For improved safety, the center contact is further recessed than in the S 105 A049.
3) Two wrenches with an opening of 32 mm are required for SV/SVE 107 series.
4) For insertion of center contact which has to be assembled after wiring, we recommend tool
TP00.000, as shown on page 12-3.
Torque 1
[Nm]
36 26 9 11 4.7 4.3 7 0.6 7
60 46 9 -
Crimping tool and dies 1)
TX00.241 & TX00.251
46 35 12 13 6.7 6.2 10 1.0 10
50 38 15 20 8.7 8.7 12 2.0 13
62 47 18 22 10.7 10.7 15 3.5 16
62 47 18 22 10.7 10.7 15 3.5 16
105 A 049
Z 4) 90 60 18 22 15 3.5 16
105 A 108 2)
10.7 10.7
100 60 18 - 10.7 - 15 3.5 16
107 A 003
Z
110 85 34 38 22.7 - 32 10 32
107 A 004 137 112 34 38 22.7 - 30 10 32
107 A 017
Z
ød
ød
137 112 34 38 30 3)
22.7 22.7
Suitable Coax cables are indicated in the column "Cable Group" in Electrical & Contact specifications. The cable specifications are listed on
page 6-9. If required, we will supply adapter sleeves which must be placed over the cable dielectric during assembly in order to guarantee
proper performance.
For cable clamps sets see page 4-11. For non-sealed Coax connectors, the collet diameter has to be selected from the tables of
type "S-Shielded", and for sealed Coax connectors from the tables of type "Environmental".
All dimensions shown are in millimeters and are for reference only.
Torque [Nm] are recommended values that may be influenced by the characteristics of the cable jacket.
Tests have to be made to evaluate the exact values. To secure the cable clamp nut, we recommend the use of thread locking adhesive.
~B
1 2
1 2
~B
øD1
5.2
~A
~A
-
øD
øD
S/SE
SV/SVE
10 32
2
7-3-1