Download - Fischer Connectors
Download - Fischer Connectors
Download - Fischer Connectors
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
General Information<br />
Part Numbering<br />
Options<br />
Cable Clamp Sets for Cable<br />
Mounted Plugs & Receptacles<br />
130 +<br />
Natural chrome housing, PEEK contact blocks with solder<br />
contacts, keying code 1 and clamp nut wihout bend relief.<br />
Not applicable as panel<br />
130<br />
mounted<br />
Natural chrome housing, PEEK contact blocks with solder<br />
contacts and keying code 1.<br />
Specifi c Suffi x<br />
Corresponding to<br />
Selected Options<br />
▼ ▼<br />
Below Cable Clamp Sets<br />
Should be Ordered Separetly<br />
Example:<br />
RELATED ITEMS<br />
Accessories Tooling<br />
102.785 TX00.240<br />
Protective sleeve Crimping tool<br />
▼ ▼<br />
Multipole Low Voltage<br />
Cable bend reliefs Spanners / Wrenches<br />
Housing Color Triax<br />
Protective sleeves Crimping tools<br />
Natural Chrome<br />
Example : Soft caps Tools for crimp<br />
Black Chrome<br />
S 102 A 056 - 130 +<br />
Metal caps<br />
Spacers<br />
contacts and high<br />
voltage contacts<br />
Contact Block<br />
Insulating Material<br />
PTFE<br />
PBT<br />
PEEK<br />
Clamp set ordering line Washers<br />
E3 102.5/2.0<br />
See page 4-11 for<br />
Cable Clamp Set selection<br />
Mounting nuts<br />
See Section 11<br />
Contact Type Below Cable Clamp Sets<br />
Solder<br />
Crimp<br />
are Included with Connector<br />
PCB<br />
Mechanical Coding of<br />
the Contact Block<br />
Clamp Nut Type<br />
& Color<br />
Other Options<br />
See page 4-10 for<br />
Multipole Low Voltage,<br />
High Voltage and Mixed<br />
Multipole options<br />
See page 6-10 for Coax<br />
Low and High Voltage,<br />
Triax and Mixed Coax<br />
options<br />
Coax Low Voltage<br />
Coax High Voltage<br />
Shielded (S) or Environmental<br />
(E) Cable Clamp Set<br />
diameter should be added to<br />
the connector part number<br />
separated by ø.<br />
Examples : Example :<br />
For Shielded S Clamp Sets<br />
Multipole High Voltage<br />
Mixed High Voltage<br />
Mixed Coax<br />
Insulating Clamp Set ø<br />
(104, 105 and 106 Series) should be<br />
added to the connector part number<br />
separated by ø and followed by<br />
UI (Unshielded Insulated).<br />
K 103 A002-600 ø6.2 S 104 A062-130 ø6.6 - UI<br />
For Environmental E Clamp Sets See page 5-6 for<br />
Insulating Clamp Set<br />
selection<br />
KE 103 A002-600 ø6.2<br />
See page 4-11 for S or E<br />
Cable Clamp Set selection<br />
See Section 12<br />
2-4