Download - Fischer Connectors

5-6
Part Numbering
Series
Multipole High Voltage
Insulating Cable Clamp Sets
Multipole High Voltage connectors as well as Mixed High Voltage and Mixed Coax connectors are equipped
with POM (Delrin®) collet type cable clamps. These insulated one-piece clamps are fitted for optimal
High-Voltage ratings.
Material
POM (Polyoxymethylene) Delrin ®
■ Connector Types with Insulating Cable Clamps
Series
104
105
106
Multipole
High Voltage
104 A 062
Z
105 A 039
Z
Mixed
High Voltage
104 A 083
Z
Mixed
Coax
104 A 078
104 A 093
105 A 020 105 A 074
105 A 057 105 A 036 105 A 089
106 A 013
Z
105 A 060 105 A 095
105 A 112
106 A 014
Insulating clamps for other cable diameters and shapes are available
on request.
Cable clamp sets for sealed or shielded connectors are available on
request.
Insulating Cable Clamp Set is Included with Connector
Multipole High Voltage Mixed High Voltage Mixed Coax
Insulating Clamp Set ø should be added to the connector part number
separated by ø (Select the collet ø according to the cable clamping range)
and followed by - UI (Unshielded Insulated).
Example
S 104 A062-130 ø 6.6 - UI
104 Series 4 pole High Voltage S plug with Insulating Cable Clamp Set allowing
cable diameter included between 4.7 & 6.6 mm
Cable
Diameter
Collet
Diameter
104 2.4 - 3.4 3.4
3.0 - 4.0 4.0
3.6 - 4.6 4.6
4.7 - 5.7 5.7
4.7 - 6.6 6.6
5.8 - 7.7 7.7
6.2 - 8.1 8.1
6.7 - 8.6 8.6
105 2.8 - 4.2 4.2
4.1 - 5.5 5.5
5.1 - 6.5 6.5
6.1 - 7.5 7.5
6.6 - 8.0 8.0
7.1 - 8.5 8.5
8.3 - 9.7 9.7
9.1 - 10.5 10.5
106 4.3 - 5.7 5.7
5.3 - 6.7 6.7
5.8 - 7.2 7.2
7.8 - 9.2 9.2
9.8 - 11.2 11.2
11.8 - 13.2 13.2
13.8 - 15.2 15.2
14.8 - 17.2 17.2
17.1 - 18.5 18.5
All dimensions shown are in millimeters and are for reference only .