Download - Fischer Connectors

12-3
■ Contact Insertion Tool
■ Contact Extraction Tool
■ Assembly Tool for Male
Contacts with Outside Thread
■ Assembly Tool for Female
Contacts with Inside Thread
Tooling
Tools for Crimp & High Voltage Contacts
Part Number Contact dia. Description
TX00.214 0.5 Tool for inserting male and female
TX00.210
TX00.211
0.7
0.9
removable crimp contacts into the
contact block.
Especially recommended for small
TX00.273 1.3 gauge and fragile wires.
Material
Handle: Black POM (Delrin ® )
Fork: Tool Steel, chrome plated
Part Number Contact dia. Description
TX00.213 0.5 Tool for extracting male and female
TX00.200 0.7
removable crimp contacts from the
contact block.
TX00.205 0.9 The sleeve of this tool is pushed over the
TX00.212 1.3
contact, thereby releasing the contact
retaining mechanism. The tool plunger is
TX00.201 1.6 then pushed to eject the contact.
Material
Housing and Plunger: Black POM (Delrin ® )
Sleeve: Stainless Steel
Slide: Tool Steel
Part Number Description
TP00.001
Material
Stainless Steel
Length 75 mm – Inside thread M3
Tool for special contacts which are inserted only after
termination to a wire.
To be used for:
- Multipole HV Cable Receptacle 107 A034
- Coax HV Plugs 105 A005 and 105 A108
- Mixed HV Cable Receptacles 105 A020,
105 A036,105 A060
Receptacles 106 A014
Part Number Description
TP00.000
Tool for special contacts which are inserted only
after termination to a wire.
To be used for:
- Multipole HV Plug 107 A034
- Coax HV Plugs 105 Z005 (right-angle only) and 105 Z049
Receptacles 105 A049, 105 A108
- Mixed HV Plugs 105 A020, 105 A036, 105 A060
and 106 A014
Material
Stainless Steel
Length 75 mm – Outside thread M1.7