Dynamic 3-201 - 3-218 - Marantec
Dynamic 3-201 - 3-218 - Marantec
Dynamic 3-201 - 3-218 - Marantec
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
C. Installation<br />
O 8<br />
O 9<br />
7.2.3 Setting OPEN travel limit<br />
• Move the door by hand to its mechanical OPEN travel limit.<br />
• Release the stop (grub screw J) of control cam (B).<br />
• Set control cam (B) in such way, that the OPEN limit switch (G) is<br />
actuated as shown in fig. 7.2.3 (position H).<br />
• Fix control cam (B) by screwing on grub screw (J).<br />
• Adjust door position OPEN, if necessary, by means of the fine<br />
adjustment screw (K) on the control cam.<br />
• Close the cover of housing again.<br />
Emergency Hand Chain (EHC):<br />
Picture shows installation of operator on left side!<br />
I = CLOSE II = OPEN<br />
Attention!<br />
Please take care, that, when connecting and<br />
mounting the emergency hand chain to the<br />
supplied piece of chain, the chain is not twisted.<br />
With a twisted chain malfunction will come up when operating the<br />
emergency hand chain.<br />
When operating the emergency hand chain, the operator will be<br />
separated from power supply!<br />
Quick release (QR):<br />
Picture shows installation of operator on left side!<br />
Attention!<br />
Observe local regulations regarding spring safety<br />
device or cable safety device.<br />
English Page 12
Change language