Dynamic 3-201 - 3-218 - Marantec
Dynamic 3-201 - 3-218 - Marantec
Dynamic 3-201 - 3-218 - Marantec
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
C. Installation<br />
O 11<br />
Mounting of Junction Box Door Frame / Wall:<br />
(if available only with closing edge safety device or connection unit door<br />
leaf).<br />
11.1 - 11.2 Mounting to the door frame:<br />
• Install the junction box by means of the mounting plate in half the door<br />
height to a track support (as shown in fig. 11.1 or 11.2).<br />
• Remove the actual screw.<br />
• Replace this by the supplied screw with flat nut.<br />
• Break through the holes for screwing.<br />
• Lead connection cable to control unit.<br />
11.3 Mounting to the wall:<br />
• Mount junction box toghether with mounting plate and angle to the<br />
wall.<br />
• Breath through the holes for screwing.<br />
• Lead connection cable to control unit.<br />
• Take care that PG – screwing is on the downward side.<br />
• Connect the winding nut, which is on coiled cable, with the fixing<br />
element.<br />
A door frame<br />
B track support<br />
C junction box<br />
D track<br />
E coiled cable<br />
F mounting plate<br />
English Page 14