Dynamic 3-201 - 3-218 - Marantec

More documents

Recommendations

Info

C. Installation O 1 Summary on different Dynamic-3 versions O 2 O 3 1.1 Dynamic 3-201 / 3-203 / 3-211 / 3-213 Version with emergency hand chain (EHC) 1.2 Dynamic 3-202 / 3-204 / 3-212 / 3-214 Version with quick release (QR) 1.3 Dynamic 3-207 / 3-208 / 3-217 / 3-218 Version with emergency hand chain with maintenance release (EHC / MR) Preparation Please compare contents of the supply package of the operator with delivery note. Required tools Combination wrench SW 17 Combination wrench SW 13 Socket wrench SW 4 Screw driver size 5 Screw driver size 8 Phillips screwdriver size 2 English Page 6 Allen wrench SW 2,5 Masonry drill ø 10 mm Metal drill ø 9 mm Pliers for securing ring Electric drill Folding rule
C. Installation O 4 Push-on Mounting 4.1 Push-on mounting with sheet steel torque support: Picture shows installation of operator on left side! • Preassemble the sheet steel torque support (A) on operator on this side, which shows to the door frame. • Push one ring (E) onto the free end of the shaft. • Push the operator, torque support already preassembled, onto the shaft end and secure it with another ring. Please observe position of the feather key! • Align the mounting brackets fitting to available space. • Mount them at the end of the torque support in direction of door frame. • Align the operator. • Fix all screws. Attention! Please mount the sheet steel torque support parallelly to the operator motor without misalignment! 4.2 Push-on mounting with channel torque support • Screw the middle console (B) (U-form metal) and the absorption elements (C) to the console of shaft support (D). • Push the securing ring (E) onto the spring shaft. • Push the operator onto the spring shaft. Please observe position of the feather key! • Screw the operator to the middle console (B) (U-form metal). • Insert a second securing ring (E) onto the spring shaft. • Push it in direction of operator. • Fix both securing rings (E). • Fix all screws and check them. English Page 7
Page 1: GB Dynamic 3-201 - 3-218 Installati
Page 4 and 5: A. Contents A. Contents............
Page 8 and 9: C. Installation O 5 Flange Mounting
Page 10 and 11: C. Installation O 7 Setting of Cont
Page 12 and 13: C. Installation O 8 O 9 7.2.3 Setti
Page 14 and 15: C. Installation O 11 Mounting of Ju
Page 16 and 17: C. Installation Attention! Remove t
Page 18 and 19: C. Installation O 13 Bottom door se
Page 20 and 21: E. Maintenance Instruction O 15 Mai
Page 22 and 23: G. Compliance Declaration Manufactu
Page 24: ENGLISH Copyright. No part of this

Dynamic 3-201 - 3-218 - Marantec

Create successful ePaper yourself

Delete template?

Save as template?