Dynamic 3-201 - 3-218 - Marantec
Dynamic 3-201 - 3-218 - Marantec
Dynamic 3-201 - 3-218 - Marantec
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
C. Installation<br />
O 13<br />
Bottom door seal with optosensor<br />
13.1 Protection category IP 54<br />
• Cut the bottom door seal at both ends (fig. 13.1).<br />
• Insert the optosensors into the bottom door seal.<br />
A Bottom door seal<br />
B Adapter sleeve<br />
C Cut in bottom door seal<br />
D Opening in bottom door seal<br />
E Optosensor receiver cable<br />
F Connecting cable optosensor<br />
G Optosensor<br />
13.2 Protection category IP 65<br />
• Cut the bottom door seal at both ends (fig. 13.2).<br />
• Insert the optosensors into the bottom door seal.<br />
Attention!<br />
Guide the cable by all means over the hose clamps!<br />
• Secure the optosensors additionnally with the hose clams.<br />
English Page 18