Ecocut - Drilling and turning with only one tool
Ecocut - Drilling and turning with only one tool
Ecocut - Drilling and turning with only one tool
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
36<br />
Material<br />
Blue: Steel<br />
Machining, cementation,<br />
tempered <strong>and</strong> constructional<br />
steels<br />
Green: Non ferrous metals<br />
<strong>and</strong> non metals<br />
Al wrought <strong>and</strong> Al cast alloys,<br />
copper, copper alloys, non<br />
metal materials<br />
Machining application type<br />
R = rough machining<br />
MasterGuide<br />
Based on VDI 3323 CERATIZIT's MasterGuide divides<br />
materials into six main groups.<br />
Each is given a colour, according to the system partly<br />
adopted in ISO 513.<br />
Yellow: Stainless steel<br />
Ferritic Cr-steels, austenitic<br />
CrNi-steels, martensitic Crsteels,<br />
duplex steels<br />
Orange: Heat resistant<br />
alloys / titanium<br />
Ni/Co-base alloys, Ti alloys<br />
Each coloured segment is divided into three sections, <strong>and</strong><br />
each section indicates the relevant machining application<br />
type:<br />
M = medium machining<br />
Red: Cast iron<br />
Cast iron, grey cast iron,<br />
tempered iron, spheroidal<br />
cast iron, CGI, sintered iron<br />
White: Hard materials<br />
Hardened steels (≥ 45 HRC),<br />
chilled castings, hard cast<br />
irons<br />
F = fine machining
Change language