Ecocut - Drilling and turning with only one tool
Ecocut - Drilling and turning with only one tool
Ecocut - Drilling and turning with only one tool
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
EcoCut <strong>with</strong> direct UTS connection<br />
The preferred solution is using EcoCut<br />
<strong>with</strong> a direct UTS connection.<br />
Even under difficult conditions the low<br />
weight <strong>and</strong> high stability obtained by<br />
compact construction make maximum<br />
cutting data possible.<br />
Page 42-43<br />
Possibilities of <strong>tool</strong> connection<br />
Additional advantages can also be obtained by applying the universal quick change <strong>tool</strong>ing system<br />
CERATIZIT Maxiflex UTS. Maxiflex UTS is characterised by a short taper <strong>and</strong> axial abutment construction<br />
<strong>with</strong> high stability <strong>and</strong> accurate repeatability.<br />
Combination <strong>with</strong> UTS adapters<br />
Additionally, the application of<br />
st<strong>and</strong>ard <strong>tool</strong>s is possible in<br />
conjunction <strong>with</strong> UTS adapters.<br />
Due to increased <strong>tool</strong> size,<br />
this combination is applied for<br />
machining operations where<br />
size / surface quality allow a<br />
larger tolerance.<br />
UTS MIY<br />
Depending on the stability of the system - machinery,<br />
workpiece, clamping - it is necessary to reduce the depth of<br />
cut <strong>and</strong> / or feed.<br />
L<br />
Overhang length<br />
L<br />
Overhang length<br />
57