9363637b, Operating manual HDTV Satellite Receiver ... - Kathrein
9363637b, Operating manual HDTV Satellite Receiver ... - Kathrein
9363637b, Operating manual HDTV Satellite Receiver ... - Kathrein
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Transmission channel<br />
Use the buttons to switch to the “Transmission channel” line and use the buttons<br />
to select a free and available transmission channel.<br />
Transmission frequency<br />
Use the buttons to switch to the “Transmission frequency” line and use the buttons<br />
to select a free and available transmission frequency, or use the number keys to enter the required<br />
frequency. When doing this, bear in mind the assignment of transmission frequencies to transmission<br />
channels.<br />
Secure channel with PIN<br />
If your one cable system allows the transmission frequency to be protected by inputting a PIN, this is<br />
the menu where that can be done. No other receiver can then use this transmission frequency unless<br />
the PIN is input.<br />
Use the buttons to switch to the “Secure channel with PIN” line and then use the buttons<br />
to select “Yes”.<br />
You then have the facility of using the number keys to input a PIN code (0-255) in the line beneath<br />
“Password PIN”.<br />
Test connection<br />
Connection and setup<br />
Refer to the documentation supplied with your system for the settings for<br />
the SCRs, frequencies and any PIN assigned to the tuner. You will fi nd there<br />
a printed list showing the assignment between the various SCRs and the<br />
respective transmission frequencies. It may happen that you cannot freely<br />
select the PIN for protection of individual frequencies; this also may be listed in<br />
the documentation for the single-cable components.<br />
Please note also that multiple receivers cannot share the same frequencies/<br />
channels - the receivers would interfere with each other.<br />
Use the buttons to switch to the “Test connection” line and then press the button to test<br />
your settings.<br />
41