E10 manual.indd - Husqvarna Viking

More documents

Recommendations

Info

CHANGING THE BULB Attention: Disconnect the machine from the power supply by removing the plug from the main socket! Replace bulb with same type rated 10 watts (110-120V) or 15 watts (220-240V). - Loosen screw (A) as illustrated. (1) - Remove the cover (B). - Unscrew the bulb and t new one (C). (2) - Replace the cover and tighten screw. Should there be any problem, ask your local dealer for advice. 10
TWO-STEP PRESSER FOOT LEVER When sewing several layers or thick fabrics, the presser foot can be raised to extra high for easy positioning of the work. (A) ADJUST PRESSER FOOT PRESSURE Tighten presser adjusting screw The presser foot pressure of the machine has been pre-set and usually requires no readjustment for most fabrics (light-or-heavy weight). + Loosen - However, if you need to adjust the presser foot pressure, turn the presser adjusting screw with a coin. For sewing very thin fabric, loosen the pressure by turning the screw counter clockwise for less pressure on the fabric, and for heavy fabric, tighten by turning it clockwise for more pressure on the fabric. 11
Page 1 and 2: E10 USER’S GUIDE
Page 3 and 4: Congratulations! As the owner of a
Page 5 and 6: PRINCIPAL PARTS OF THE MACHINE 1. T
Page 7 and 8: ACCESSORIES 1 2 3 4 1. All purpose
Page 9: CONNECTING THE MACHINE TO POWER SOU
Page 13 and 14: WINDING THE BOBBIN Place thread and
Page 15 and 16: INSERTING THE NEEDLE Change the nee
Page 17 and 18: THREAD TENSION Basic thread tension
Page 19 and 20: REVERSE SEWING At the end of a seam
Page 21 and 22: STRAIGHT STITCHING Stitch length di
Page 23 and 24: HOW TO SEW BUTTONHOLES Stitch lengt
Page 25 and 26: BLIND HEM Stitch length dial For he
Page 27 and 28: 3-STEP ZIG-ZAG Stitch length dial S
Page 29 and 30: MAINTENANCE Attention: Disconnect t
Page 31 and 32: Please note that on disposal, this

E10 manual.indd - Husqvarna Viking

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?