E10 manual.indd - Husqvarna Viking

CONNECTING THE MACHINE TO POWER SOURCE
Connect the machine to a power source as illustrated. (1)
A polarized plug must be used with the appropriate polarized outlet.
(2)
Attention:
Unplug power cord when machine is not in use.
Foot control
Foot control regulates the sewing speed. (3)
Attention:
Consult a quali ed electrician if in doubt as to how to connect machine to
power source.
1
Unplug power cord when machine is not in use.
The appliance must be used with the foot controller:
For USA and Canada, 110-120V: KD-1902
For Australia and Europe, 220-240V: KD-2902
Sewing light
Press main switch (A) for power and light on. (“ l “)
3
For USA and Canada
For appliance with a polarized plug (one blade is wider than the
other).
To reduce the risk of electric shock, this plug is intended to t in
a polarized outlet only one way. If it does not t fully in the outlet,
reverse the plug. If it still does not t, contact a quali ed electrician
to install the proper outlet. Do not modify the plug in any way.
9