E10 manual.indd - Husqvarna Viking

More documents

Recommendations

Info

BRINGING UP THE BOBBIN THREAD Hold the upper thread with the left hand. Turn the handwheel towards you until the needle is raised. (1) Pull on the upper thread to bring the bobbin thread up through the stitch plate hole. Place both threads to the back under the presser foot. (2) 18
REVERSE SEWING At the end of a seam, press down the reverse sewing lever. Sew a few reverse stitches to “the tie off” the thread ends. Release the lever and the machine will sew forwards again. (1/A) REMOVING THE FABRIC Turn the handwheel toward you to bring the thread take up lever to its highest position, raise the presser foot and remove fabric to the back. (2) CUTTING THE THREAD Hold the threads behind the presser foot with both hands, pull them into the thread cutter (B) and down (3) to cut. 19
Page 1 and 2: E10 USER’S GUIDE
Page 3 and 4: Congratulations! As the owner of a
Page 5 and 6: PRINCIPAL PARTS OF THE MACHINE 1. T
Page 7 and 8: ACCESSORIES 1 2 3 4 1. All purpose
Page 9 and 10: CONNECTING THE MACHINE TO POWER SOU
Page 11 and 12: TWO-STEP PRESSER FOOT LEVER When se
Page 13 and 14: WINDING THE BOBBIN Place thread and
Page 15 and 16: INSERTING THE NEEDLE Change the nee
Page 17: THREAD TENSION Basic thread tension
Page 21 and 22: STRAIGHT STITCHING Stitch length di
Page 23 and 24: HOW TO SEW BUTTONHOLES Stitch lengt
Page 25 and 26: BLIND HEM Stitch length dial For he
Page 27 and 28: 3-STEP ZIG-ZAG Stitch length dial S
Page 29 and 30: MAINTENANCE Attention: Disconnect t
Page 31 and 32: Please note that on disposal, this

E10 manual.indd - Husqvarna Viking

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?