E10 manual.indd - Husqvarna Viking
E10 manual.indd - Husqvarna Viking
E10 manual.indd - Husqvarna Viking
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
INSERTING THE NEEDLE<br />
Change the needle regularly, especially if it is showing signs of wear<br />
and causing problems.<br />
Insert the needle following the illustrated instructions.<br />
A. Loosen the needle clamp screw and tighten again after inserting<br />
the new needle. (1)<br />
B. The at side of the needle shaft should be towards the back.<br />
C/D.Insert the needle as far up as it will go.<br />
Attention:<br />
Turn power switch to off (“O”).<br />
Needles must be in perfect condition. (2)<br />
Problems can occur with:<br />
A. Bent needles<br />
B. Damaged points<br />
C. Blunt needles<br />
15