28.03.2013 Views

Revere Fireplace Insert Owner's Manual - Lopi

Revere Fireplace Insert Owner's Manual - Lopi

Revere Fireplace Insert Owner's Manual - Lopi

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

26 Maintaining Your Appliance<br />

Baffle Removal & Replacement<br />

1 Push the front firebricks up and feed them forward, guiding them out the door. Repeat for the<br />

rear firebricks.<br />

Bypass Rod (& Yoke)<br />

Front Baffle Support Baffle Firebrick<br />

Bypass Damper<br />

Front Air Tube<br />

2 The baffle supports rest on support tabs.<br />

3 The bypass support and damper are difficult to remove and should only be removed if necessary.<br />

Remove the rear secondary air tube (see the following section for instructions). Slide the bypass<br />

support forward until the bypass rod can be disconnected from the bypass damper. Slide the<br />

damper forward and remove. The bypass support is removed by sliding it forward and rotating it<br />

downwards (the bypass holder fits very snug inside the firebox and is very heavy, making it<br />

difficult to remove). The bypass gasket rests on the side and rear air channels. Try not to<br />

damage it when removing the bypass holder.<br />

Air Tube Removal & Replacement<br />

Air Tube<br />

Air Tube Collar<br />

Support Tabs<br />

a<br />

Roll Pin<br />

<br />

<br />

Center Baffle Support<br />

Bypass Support<br />

Bypass Gasket<br />

© Travis Industries 100-01165 4110919<br />

b<br />

Remove the left pin on the air tube collar<br />

Slide the air tube to the left, swing it<br />

down and remove from the firebox.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!