Cyclo® 6000 - Sumitomo Drive Technologies
Cyclo® 6000 - Sumitomo Drive Technologies
Cyclo® 6000 - Sumitomo Drive Technologies
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
All dimensions are in inches<br />
Model<br />
CVV<br />
6130/5Y 10.24<br />
6140/5Y 10.24<br />
CYCLO® <strong>6000</strong> Speed Reducers<br />
Dimensions Vertical V-Flange Mount<br />
A B C G H NO. M P AH X Y<br />
7.8720<br />
7.8692<br />
7.8720<br />
7.8692<br />
12.64 0.59 0.43 6 2.99 0.16 9.06 5.98 9.17<br />
13.43 0.59 0.43 6 3.78 0.16 9.06 5.98 9.17<br />
<strong>Cyclo®</strong> <strong>6000</strong> Series<br />
Single Reduction<br />
CVV-6130/5Y 6140/5Y<br />
*Shaft Tolerances<br />
Shaft Nominal Diameter (inches) Tolerances (inches)<br />
0.500 (1/2) through 0.625 (5/8) +0.0000/-0.0004<br />
0.750 (3/4) through 1.125 (1 1/8) +0.0000/-0.0005<br />
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006<br />
2.000 (2) through 3.125 (3 1/8) +0.0000/-0.0007<br />
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009<br />
4.750 (4 3/4) through 7.000 (7) +0.0000/-0.0010<br />
Model Low Speed Shaft High Speed Shaft Approx.<br />
CVV U* V S L1 Key XU* XV Key Wt. (lb.)<br />
6130/5Y 1.875 2.40 3/8-16UNC 0.71 1/2 X 1/2 X 2.16 0.875 1.57 3/16 X 3/16 X 1.38 93<br />
6140/5Y 1.875 3.19 3/8-16UNC 0.71 1/2 X 1/2 X 2.95 0.875 1.57 3/16 X 3/16 X 1.38 95<br />
Dimensions shown are for reference only and are subject to change without notice, unless certified.<br />
Certified prints are available after receipt of an order; consult factory.<br />
Dimensions<br />
Dimensions 4.63<br />
Speed<br />
Reducers
Change language