Cyclo® 6000 - Sumitomo Drive Technologies

All dimensions are in inches
Cyclo® 6000 Series
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount, Hollow Input
Single Reduction
CNHX-6065Y 6115Y (cont.)
Model Motor
AJ AK BD BB BF R CE CL C Z
High Speed Shaft Approx
CNHX Frame XU XV Keyway Wt. (lb)
6060/5Y 56C 5.88 4.50 6.69 [1] 0.20 0.43 4 6.61 2.99 5.59 0.47 0.625 +0.0007
0.0000
6070/5Y 56C 5.88 4.50 6.69 [1] 0.20 0.43 4 6.85 2.99 5.83 0.47 0.625 +0.0007
0.0000
56C 5.88 4.50 6.69 0.20 0.43 4 8.19 3.11 7.54 0.47 0.625 +0.0007
6080/5Y
143TC-145TC 5.88 4.50 6.69 0.20 0.43 4 8.19 3.11 7.54 0.47
0.0000
0.875 +0.0008
0.0000
56C 5.88 4.50 6.69 0.20 0.43 4 8.94 3.35 7.91 0.47 0.625 +0.0007
6090/5Y
143TC-145TC 5.88 4.50 6.69 0.20 0.43 4 8.94 3.35 8.31 0.47
-.00000
0.875 +0.0008
0.0000
56C 5.88 4.50 6.69 0.20 0.43 4 9.29 3.15 8.23 0.47 0.625 +0.0007
6100/5Y
143TC-145TC 5.88 4.50 6.69 0.20 0.43 4 9.29 3.15 8.70 0.47
-0.0000
0.875 +0.0008
-0.0000
56C 5.88 4.50 6.69 0.20 0.43 4 9.29 3.15 8.23 0.47 0.625 +0.0007
610HY
143TC-145TC 5.88 4.50 6.69 0.20 0.43 4 9.29 3.15 8.70 0.47
-0.0000
0.875 +0.0008
-0.0000
56C 5.88 4.50 6.69 0.20 0.43 4 9.96 3.27 9.31 0.47 0.625 +0.0007
6110/5Y
143TC-145TC 5.88 4.50 6.69 0.20 0.43 4 9.96 3.27 9.31 0.47
-0.0000
0.875 +0.0008
-0.0000
182TC-184TC 7.25 8.50 8.98 0.22 0.59 4 10.71 4.02 9.61 0.69 1.125 +0.0008
-0.0000
Note: [1] Center height “D” for 6065Y and 6075Y is less than the radius of motor flange diameter “BD” (frame 56C).
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
1.10 3/16 X 3/32 10
1.10 3/16 x 3/32 10
1.56 3/16 x 3/32 23
1.56 3/16 x 3/32 23
1.18 3/16 x 3/32 29
1.57 3/16 x 3/32 29
1.18 3/16 x 3/32 33
1.65 3/16 x 3/32 33
1.18 3/16 x 3/32 35
1.65 3/16 x 3/32 35
1.56 3/16 x 3/32 38
1.56 3/16 x 3/32 38
1.85 1/4 x 1/8 44
Dimensions
Dimensions 4.11
Speed
Reducers