K2 Dyno Replay System Quick Start Guide - Grass Valley

More documents

Recommendations

Info

Chapter 2 Operation K2 AppCenter Elite ChannelFlex configurations Dyno-Packs are available to provide ChannelFlex features, such as these illustrated examples. K2 Dyno Controller setup: 4 record, 2 playout C1 K2 Summit Client C2 K2 Summit Client There are many other types of configuration setups. For more information, consult your Grass Valley representative. 28 K2 Dyno Replay System Quick Start Guide 16 May 2011 C3 C4 K2 Dyno Controller setup: 1 Super Slo Mo, 2 regular inputs, 2 playout C1 C2 C3 C4
Tips and shortcuts Chapter 2 Operation To assign a rating (stars) to a highlight clip, use keyboard shortcut F1. The Shift button toggles between the top and bottom functions, as labeled on the controller’s buttons. The Shift button also affects the function of controls displayed on the touch screen. From Config | Panel, you can adjust controller panel attributes such as LCD and button brightness. You can adjust the speed, range, and other parameters of the jog knob and the T-bar. To play an angle from the beginning of the clip, press FN and then press A or B or C. Swap channels between PI and P2 playout channels by pressing Fn and then Take. To cue up a highlight, double-tap on the highlight. All Angle Playlist — select highlight clip, press Fn then Add PL. Change angles in the playlist — Fn and Angle button Slot box selection: To select a bin, enter its number. Example: typing 1 selects bin 1. To select a particular slot inside a bin, type the bin number and the slot number. Example: typing 1.2 cues up the second slot in bin 1. To select a particular angle, type the bin, slot, and angle number. Example, typing 1.2.3 selects the third angle of the second slot in bin 1 To add a pause to a single event in a playlist, press Fn and the corresponding M/E symbol to the right of the event. 16 May 2011 K2 Dyno Replay System Quick Start Guide 29
Page 1 and 2: K2 Dyno Replay System Quick Start G
Page 3 and 4: K2 Dyno Replay System Quick Start G
Page 5 and 6: Chapter 1 Installation This section
Page 7 and 8: Cable K2 Summit Client Cable K2 S
Page 9 and 10: Configure network If the network ha
Page 11 and 12: Monitor K2 Summit Client channels M
Page 13 and 14: Chapter 2 Operation Start using the
Page 15 and 16: Replay Live/Local button Red = Live
Page 17 and 18: Add metadata EnternameEnter F1
Page 19 and 20: Create a playlist: Controller inter
Page 21 and 22: Setting up auxiliary audio 1 Aux
Page 23 and 24: Chapter 2 Operation Set export path
Page 25 and 26: Shutdown K2 Dyno Controller 1 CONF
Page 27: Multichannel + gang mode 2 Record,
Page 31 and 32: Chapter 3 Problems and solutions Th
Page 33 and 34: Grass Valley Product Support Grass
Page 35 and 36: Waste Electrical and Electronic Equ

K2 Dyno Replay System Quick Start Guide - Grass Valley

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?