CAT-300 Repeater Controller - Computer Automation Technology

Send the Time of Day [DX]
Key-up and send [*20]. Un-key, the voice will read the time, day of week,
month and day of month. Example: "THE TIME IS TWELVE FIFTEEN PM MONDAY JUNE
FIVE."
Setting the Clock [DX]
Key-up and send [*21] followed by the hours, minutes, day of week, day of
month, and month of year. See Figure 5-3 for the number that represents the
day of week. Un-key and the voice will say "CONTROL OK." Example: 2:55 PM
Monday January 25th. All entries must be double digit, except the day of
week.
┌─────────────────Day of Week
Minutes───────────┐ │ ┌──────────────Day of Month
Hours────────┐ │ │ │ ┌───────────Month of Year
*21 14 55 2 25 01
╔═══════════════════════╤══════════════╗
║ Hour 0-23 │ Sun=1 ║
║ Minute 0-59 │ Mon=2 Fri=6 ║
║ Day of Week 1-7───┤ Tue=3 Sat=7 ║
║ Day of Month 1-31 │ Wed=4 ║
║ Month of Year 1-12 │ Thr=5 ║
╚═══════════════════════╧══════════════╝
Figure 5-3
Select 24 Hour Clock Operation
To select 24 hour clock announcements, key-up and enter [*222], un-key and the
voice will say "CONTROL" OK." To return to 12-hour clock announcements, key-up
and enter [*221]. To read the current selection, key-up and enter [*220].
Voice Synthesizer Memory Storage
Space is provided for twelve user programmable messages of up to 23 words each.
Send Synthesized Voice Message Locations (01-12)
Key-up and send [*30XX]. Un-key and the voice synthesizer will say the message
stored at memory location "XX".
Program Synthesized Voice Message Locations (01-12)
Key-up and send [*31XX], followed by the three digit numbers that represents
the words required to construct the message. Memory space is provided for
twenty-three entries. Refer to Chapter 9, Voice Vocabulary Word List.
Example: Load Repeater ID #1 with "W4XYZ Repeater"
Message Number──┐ W 4 X Y Z ┌──Repeater
Programming──┐ │ │ │ │ │ │ │
Command *31 01 890 004 920 930 950 746
5-5