APPLIX Vision - Fresenius Kabi - Home

More documents

Recommendations

Info

KEYPAD Keys Symbol Operation Function On/Off Press key for at least 1 second Automatic priming Select application programs Pump switches on (self-test) or pump switches off. Keep key depressed Initially fill giving set with feed (600 ml/h). Release key once priming is complete. Press key (several times if appropriate Choose between programs: continuous volume/time bolus Set rate Press key Up arrow key increases (rate or dose). Down arrow key decreases. Set time Press key Up arrow key increases (feed administration time or time interval). Down arrow key decreases. Target volume On/Off Press keys simultaneously 12 4150-2_nu_Applix_<strong>Vision</strong>_GB GB Activates target volume function or switches off target volume function. Press keys individually Sets target volume.
GB Keys Symbol Operation Function Start/Stop Press key Starts administration or stops administration: STOP appears in the bottom display cell for 3 seconds. (During which time parameters cannot be changed). Reset Press keys simultaneously Selection of a feeding program and blocking of the two other feeding programs The following functions are available only if the pump is stopped: Pump returns to original factory settings of continuous feeding at a rate of 100 ml/h. Press key Selection of application program to be used. Press key Key symbol and symbol of program selected flash in display. Press key Confirmation of feeding program selected. The appropriate program is shown permanently in the display. The key symbol continues to flash. Press key Key symbol disappears from the display. The feeding pump can be operated in the application program selected. The two other programs are blocked. When the MODE key is pressed, an alarm signal sounds and the key symbol appears in the display. 4150-2_nu_Applix_<strong>Vision</strong>_GB 13
Page 2 and 3: Contents Operating instructions for
Page 4 and 5: INFORMATION Intended purpose The AP
Page 6 and 7: DESCRIPTION Illustration of the pum
Page 8 and 9: Attaching the pump to the pump hold
Page 10 and 11: GIVING SET Priming of the giving se
Page 14 and 15: Keys Symbol Operation Function Canc
Page 16 and 17: Keys Symbol Operation Function To r
Page 18 and 19: STARTING UP THE PUMP Mains operatio
Page 20 and 21: ADMINISTRATION PROGRAM The APPLIX V
Page 22 and 23: 1 2 3 Switch on pump Select program
Page 24 and 25: 1 2 3 4 Switch on pump Select progr
Page 26 and 27: 1 2 3 4 Switch on pump Select progr
Page 28 and 29: Alarm Symbol Cause Remedy Battery a
Page 30 and 31: Alarm Symbol Cause Remedy Line empt
Page 32 and 33: CLEANING THE PUMP Clean pump and pu
Page 34 and 35: TECHNICAL INFORMATION Technical dat
Page 36 and 37: Warranty Pump and pump holder are
Page 38 and 39: Explanation of symbols IP 31 IP 34
Page 40 and 41: ELECTROMAGNETIC IMMUNITY - TABLE 20
Page 42 and 43: RECOMMENDED SEPARATION DISTANCES BE
Page 44: 4150-2_nu_Applix_Vision_GB

APPLIX Vision - Fresenius Kabi - Home

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?