APPLIX Vision - Fresenius Kabi - Home

More documents

Recommendations

Info

TECHNICAL INFORMATION Technical data Weight Pump: 480 g Pump holder: 450 g Dimensions 128 x 114 x 43 mm 146 x 162 x 115 mm Disposal For appropriate disposal, at the end of the device life, please contact your local Fresenius Kabi organisation or your local distributor. Protection against electric shock Electromagnetic interference Safety of ElectroMedical Equipments Protection against moisture Pump Holder Electrical supply Mains supply Protection class II, symbol Type BF, symbol 34 4150-2_nu_Applix_Vision_GB GB This device can be disturbed by large electromagnetic fields, external electrical influences and electrostatic discharges above the limits stipulated by EN 60 601-1-2. It can also be disturbed by pressure or pressure variations, mechanical shocks, heat ignition sources, etc. If you wish to use the device in special conditions, please contact Fresenius Kabi Ltd. This mobile RF communication equipment can affect medical electrical equipment. Conform to EN/IEC 60 601-1 IP34 (splash-protected) IP31 (drip-protected) 100-230 V + 10% / 50-60 Hz 15 VA Battery type NiMH 4.8V 1.2Ah / 1.8Ah (Nickel-Metal Hydride) Pump holder output Pump battery mode 7.75 V / 800 mA 24 h at 125 ml/h Equipment group IIa acc. to MDD
GB Operating conditions Pump, pump holder Operating temperature Storage temperature Max. rel. humidity Attachment size (vertical/horizontal) +13 to +40°C - 20 to +45°C Max. 85%, no condens. Cylinder shape: 18-36 mm Square shape: 10x25 mm Deviation of rate Max. 10% for rates > 3 ml/h Upstream occlusion detection Occlusion pressure Max. 2 bar Accessories/material See contents Volume delivered at start: approx. 2 ml for rates 50 ml/h, approx. 4 ml for rates > 50 ml/h. This volume is compensated within the first hour of delivery for rates > 3 ml/h. There is no compensation of the initial volume for rates 3 ml/h. Please see also "Indication", page 4. Mode Suitable for continuous, volume/time and bolus operations Feeding program Page 21-24 Nurse call Potential-free switch, 4 KV decoupling Power output: 24 V / 100 mA to power Nurse Call Serial communication RS232 optical isolation 4kV Recycling battery To preserve the environment, remove the battery from the device prior to destruction and as during normal maintenance replacement, return it to a competent recycling organisation. Avoid short circuit and excessive temperature. WARNING! The internal batteries should be changed every 2 years. In case of a prolonged storage period, it is recommended that the battery is removed. 4150-2_nu_Applix_Vision_GB 35
Page 2 and 3: Contents Operating instructions for
Page 4 and 5: INFORMATION Intended purpose The AP
Page 6 and 7: DESCRIPTION Illustration of the pum
Page 8 and 9: Attaching the pump to the pump hold
Page 10 and 11: GIVING SET Priming of the giving se
Page 12 and 13: KEYPAD Keys Symbol Operation Functi
Page 14 and 15: Keys Symbol Operation Function Canc
Page 16 and 17: Keys Symbol Operation Function To r
Page 18 and 19: STARTING UP THE PUMP Mains operatio
Page 20 and 21: ADMINISTRATION PROGRAM The APPLIX V
Page 22 and 23: 1 2 3 Switch on pump Select program
Page 24 and 25: 1 2 3 4 Switch on pump Select progr
Page 26 and 27: 1 2 3 4 Switch on pump Select progr
Page 28 and 29: Alarm Symbol Cause Remedy Battery a
Page 30 and 31: Alarm Symbol Cause Remedy Line empt
Page 32 and 33: CLEANING THE PUMP Clean pump and pu
Page 36 and 37: Warranty Pump and pump holder are
Page 38 and 39: Explanation of symbols IP 31 IP 34
Page 40 and 41: ELECTROMAGNETIC IMMUNITY - TABLE 20
Page 42 and 43: RECOMMENDED SEPARATION DISTANCES BE
Page 44: 4150-2_nu_Applix_Vision_GB

APPLIX Vision - Fresenius Kabi - Home

Create successful ePaper yourself

Delete template?

Save as template?