Renesas MCU M16C Family (R32C/M32C/M16C/R8C) - Glyn

43
•
•
•
•
•
•
•
E8 Emulator
On-Chip Debugging Emulator for General MCUs Tiny Series Products
Web
http://www.renesas.com/e8
Compact design: 97mm X 65mm X 22mm
Provides real-time emulation at the CPU's max.
operating frequency, allowing evaluation under
conditions similar to the end product.
Compatible with High-performance Embedded
Workshop V. 4 integrated development environment for
Main Specifications
Series
M32C/80
M16C/60
M16C/30
Supported MCUs
M16C/Tiny
Group
M32C/84, M32C/85, M32C/87, M32C/88
M16C/62P, M16C/6N4, M16C/6N5, M16C/6NK, M16C/6NL, M16C/6NM,
M16C/6NN
M16C/30P
M16C/26, M16C/26A, M16C/28, M16C/29
ease of use and enhanced development efficiency.
Connects to the PC using the USB bus, so no dedicated
power supply is required for the emulator.
Can also supply power to the user's system, allowing
development without an external power supply.
Can be used as a flash memory programming tool.
The 14-pin user interface is compatible with the E7
emulator, so the E8 can be used with systems
compatible with the E7.
The emulator comes packaged with the following
software. Customers can begin development and
debugging work on application programs right away
after purchasing it.
Max. operating frequency
Supported MCU modes
Supported power supply voltage
Power supply to MCU
Software breaks
Hardware breaks
Special breaks
Trace
PC interface
Operating environment
R8C/10, R8C/11, R8C/12, R8C/13, R8C/14, R8C/15, R8C/16, R8C/17,
R8C/18, R8C/19, R8C/20, R8C/21, R8C/22, R8C/23, R8C/24, R8C/25
R8C/Tiny
(R8C/26, R8C/27, R8C/28, R8C/29, R8C/2A, R8C/2B, R8C/2C, R8C/2D
currently in preparation)
Max. operating frequency of target MCU
Single-chip mode, memory expansion mode (supported MCU modes differ depending on the MCU product)
2.7V to 5.5V (within guaranteed flash programming operation range of target MCU)
Supplied by emulator (3.3V or 5.0V, max. 300mA) or from Vcc on user board.
255 points
Number of points differs depending on the MCU product. *1
4 address break points on R8C/14 to R8C/1B. Otherwise 2 address break points + 1 data condition break point.
Forced break using BREAK key.
Number of jumps differs depending on the MCU product. *1
Jump source PC trace (jump source address for latest 4 jumps) on R8C/14 to R8C/1B.
USB 1.1/2.0 full speed
Windows 98SE/Me/2000/XP
• High-performance Embedded Workshop integrated User interface 14-pin connector (Sumitomo 3M Limited model 7614-6002) (sold separately) *Compatible with E7 emulator.
development environment
• Cross tool (free evaluation version)
• Flash development toolkit (free evaluation version)
The latest versions of the bundled software can be
downloaded free of charge from the E8 emulator Web
site.
Connected using supplied user interface cable
Target ports and
R8C/14 to R8C/17: Communication using single mode pin
connections
R8C/10 to R8C/13: Communication using P00, P37, CNVss
Dimensions (mm) 97 65 22
Overseas standards Compliant
*1 See the E8 emulator Web site for details on specific MCU products. http://www.renesas.com/e8
This is the debugger module of the High-performance
Embedded Workshop integrated development environment.
Using the emulator's break function and many source-level
debugging functions, it is possible to perform debugging under
conditions very similar to the finished product when the user's
system is completed.
• All functions are implemented using operations common to
other Renesas tools.
•
•
Debugging Using
the E8 as an Emulator
In addition to emulator/debugger capabilities, it is possible to
E8 Emulator Unit
realize a seamless integrated development environment that
combines a building environment and debugging environment
by installing a C compiler package.
Programming can be accomplished easily using the writing
flash memory mode.
The Flash Development Toolkit is a dedicated programming
tool that makes it possible to write and rewrite programs to
MCUs with on-chip flash memory when they are already
mounted in the user's system.
•
•
Programming Using
the E8 as a Programmer
Bundled
Emulator/Debugger Software
Flash Development Toolkit (free evaluation version)
Bundled
Software
Supports a wide variety of Renesas MCUs.
Flexible, easy-to-use GUI
The software has a main window mode providing high-level
functions, as well as a basic mode designed for on-site
programming.
Dedicated Web site for Flash Development Toolkit:
http://www.renesas.com/fdt
Note: To program the MCU in the finished product, use the HS6400FDIW3SR full product
version (available for purchase) instead of the free evaluation version that is bundled
with the E8. The full version includes technical support and an upgrade service.