Manual Evo 8.0 - PhotoBooth Digital Centre

Recommendations

Info

21.3 BOOT DVD To Update the Machine or change the software version, please follow these steps: 1· Open the DVD Driver. 2· Insert the “Boot DVD”. 3· Plug Off the Machine. 4· Plug On the Machine after 10 seconds. 5· Wait while the restore program reinstalls the software (a progress bar appears on the screen). The time process is about 30 minutes 6· A black screen appears when the process finishes. 7· Extract the DVD disk. 8· Plug Off the Machine. 9· Plug On the Machine after 10 seconds. (In case that the Restore Program does not start automatically and shows the message “Extract the dvd” immediately, then go to the “Run the Restore Program <strong>Manual</strong>ly” (At the end of this <strong>Manual</strong>). CUSTOMIZED FRAMES: If you have customized frames and/or logos now is the time to upload. 1· Install the “Customized Frames DVD” into the DVD driver (CD or USB too). 2· Turn off the Machine. 3· Turn on the Machine after 10 seconds. 4· When the software is working in Demo, then go into the SETUP MENU, by pressing the Yellow button at the Setup Control Panel. It will read the customized frames and/or logos automatically before the software start. 5· Be sure to select LOGO=YES and the correct frames and Wait for the Setup Menu save all changes. (Wait for the “Shut Down Please” message on the screen). 6· When the software runs in Demo again, you can extract the DVD, CD or USB, and keep it to a safe place. The NEW FRAMES are now working; you can go to Setup Menu and adjust the Date at the correct position. 144
21.4 DONGLE ERROR If you switch on the Photo booth and the following message appears; “Sentinet HASP key not found (H0007)”, it means that the printer dongle is not well connected. The USB dongle must be connected on P.7 (please see picture). P.7 P.7 Dongle USB Security and Software. MEGA OUT 145
Page 1 and 2:
EUR-USA v8.0 USER MANUAL
Page 3 and 4:
Copyright and Trademarks This manua
Page 5 and 6:
12.Internet------------------------
Page 7 and 8:
1-SAFETy INSTRUCTIONS The following
Page 9 and 10:
196 cm / 77 inches 145 cm / 57 inch
Page 11 and 12:
Plug the power cord into the socket
Page 13 and 14:
CONTROL BOARD (DC-EVO-V3.0) LEDS JP
Page 15 and 16:
5.3 PC MEGA IN PC MEGA IN MONITOR S
Page 17 and 18:
5.5 PRINTER PRINTER WIRING P.1 Main
Page 19 and 20:
25 16 21 23 11 10 26 20 22 15 24 18
Page 21 and 22:
FRONT PANEL FEATURES & FUNCTIONS 21
Page 23 and 24:
BEFORE OPERATION 23
Page 25 and 26:
BEFORE OPERATION 25
Page 27:
CLEANING 27
Page 30 and 31:
Photo ID Color and Black & White Wh
Page 32 and 33:
PRINTING The Street Art is shown on
Page 34 and 35:
PRINTING The pictures are shown on
Page 36 and 37:
USB stick 1· Necessary Materials:
Page 38 and 39:
2-Create a folder on the USB stick
Page 40 and 41:
Welcome message (custom) You must c
Page 42 and 43:
A FOLDER PhotoIdUpload USB stick US
Page 44 and 45:
Bye You must create this folder Bye
Page 46 and 47:
All Text in this file is printed ve
Page 48 and 49:
A FOLDER PhotoIdUpload USB stick Ph
Page 50 and 51:
PhotoIdUpload You must create this
Page 52 and 53:
Sample If you want to customize the
Page 54 and 55:
USB stick USB stick *PhotoIdEvents
Page 56 and 57:
PC IN USB STICk OPTIONAL PRINTER 9-
Page 58 and 59:
The setup menu is very useful for t
Page 60 and 61:
11.1.1 ExTRA COPIES You can turn on
Page 62 and 63:
11.3.1 LOGO 1-The menu is displayed
Page 64 and 65:
11.3.4 WELCOME/ByE 1-The menu is di
Page 66 and 67:
11.4 OPTIONS Defines the parameters
Page 68 and 69:
11.5 CAMERA In the submenu CAMERA,
Page 70 and 71:
Problem The unit is switch ON, but
Page 72 and 73:
· GENERAL PROBLEMS Problem The uni
Page 74 and 75:
· WARNING · If you have any doubt
Page 76 and 77:
2-The logo specifications/character
Page 78 and 79:
5· Once you are inside the “DEVI
Page 80 and 81:
SATA DVD SATA SATA DVD POWER 11· I
Page 82 and 83:
If you switch on the Photo booth an
Page 84 and 85:
Lights ON P.1 PC WIRING 13.6 TOUCh
Page 86 and 87:
The “Please Wait” error is very
Page 88 and 89:
The control Board is the green boar
Page 90 and 91:
CONTROL BOARD (DC-EVO-V3.0) LEDS JP
Page 92 and 93:
MEGA OUT 15.3 PC PC MEGA OUT 4 MONI
Page 94 and 95: OPTIONAL PRINTER 7 9 A 8 3 COMPONEN
Page 96 and 97: 19 18 P.1 P.4 COMPONENTS 18. Monito
Page 98 and 99: Type the email address where you wa
Page 100 and 101: haircuts SELECT DESIRED LOOk You ca
Page 102 and 103: Street Art Get Framed Shots 3 Shots
Page 104 and 105: USB stick A PhotoIdUpload You must
Page 106 and 107: A USB stick FOLDER PhotoIdUpload Ph
Page 108 and 109: A FOLDER PhotoIdUpload USB stick US
Page 110 and 111: Bye message (custom) Bye You must c
Page 112 and 113: Welcome message random You must cre
Page 114 and 115: A FOLDER PhotoIdUpload USB stick Ph
Page 116 and 117: A FOLDER PhotoIdUpload USB stick Ph
Page 118 and 119: To create a new framework we will c
Page 120 and 121: Screen2 7a 7b 7c 7d 10a 10b 10c 10d
Page 122 and 123: Sample PhotoIdUpload You must creat
Page 124 and 125: CUSTOMShots are the images (made pr
Page 126 and 127: PC OUT USB STICk 18-UPLOADING 1-Swi
Page 128 and 129: The setup menu is very useful for t
Page 130 and 131: 20.2 RENTALS Free Play: YES Timer:
Page 132 and 133: 20.3.2 Text 22.3.3 DATE 1-The menu
Page 134 and 135: 20.4 OPTIONS Defines the parameters
Page 136 and 137: · SOUND PROBLEMS Problem The sound
Page 138 and 139: USB stick It’s recommended to use
Page 140 and 141: hARD DRIVE ERROR 21.2 hARD DRIVE Th
Page 142 and 143: 7· With the Keyboard arrows, move
Page 146 and 147: 21.5 CAMERA ERROR When you take a p
Page 148 and 149: The control Board is the green boar
Page 150 and 151: 1 (DE3501) DECAL. MEGA #1 Back Wall
Page 152 and 153: PL0010 “LOOK HERE”#1 METHACRYLA
Page 154 and 155: ME2930 METAL LEG (16X80 MM INCH 0,0
Page 156 and 157: EL3506 BALLAST 230V/36W EL3507 BALL
Page 158 and 159: 25.2 MEGA OUT CA0005 COIN READER CA
Page 160 and 161: ME3507 RIGHT PRINTER SUPPORT. (RAW
Page 162 and 163: 26-NOTES 162
Page 164 and 165: CONTENTS 1. Myphotocode.com--------
Page 166 and 167: 2. MANAGE yOUR USB SET UP 1. You ne
Page 168 and 169: 3- Here you can prepare the USB to
Page 170 and 171: 2- When the USB has been created we
Page 172 and 173: 2.3.3 BACkGROUND MUSIC: You can upl
Page 174 and 175: 2.3.5 WELCOME SCREEN: There are 2 o
Page 176 and 177: 2.4 DOWNLOAD ThE USB SET UP Downloa
Page 178 and 179: Edit the options: 3.2 MANAGE ThE ON
Page 180 and 181: At the moment to see the pictures,
Page 182 and 183: 3.2.1 Photos: you will see a new wi
Page 184: WARNING! Remember, to get the photo
show all

Manual Evo 8.0 - PhotoBooth Digital Centre

Create successful ePaper yourself

Delete template?

Save as template?