Manual Evo 8.0 - PhotoBooth Digital Centre

The PC lights are ON?
13.8 NO SIGNAL
Lights are ON
Check if the PC lights are ON.
If the lights are on then it appears that the Photobooth is working but the monitor is not.
Next steps:
When you turn ON the Photobooth, can you see any message on the screen? (ex; manufacturer
name, or “NO SIGNAL”)?
If this is the case, the VGA cable is probably unplugged or damaged.
But if nothing is on the screen (when you turn ON the Photobooth), please check if there
is power to the Monitor. Power cable is probably unplugged from the monitor.
13.9 IMAGE ADJUSTING
If the image moves press the button
“Auto” which is in the back of the screen
AUTO
87