Manual Evo 8.0 - PhotoBooth Digital Centre
Manual Evo 8.0 - PhotoBooth Digital Centre
Manual Evo 8.0 - PhotoBooth Digital Centre
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
The “Please Wait” error is very common. It<br />
looks like the PC freezes, but it isn’t. The problem<br />
is that the computer is waiting for the<br />
right components.<br />
When we turn on the Photo Booth, the computer<br />
shows the “Please Wait” screen while it<br />
checks the Control Board, the USB adapter<br />
and the Printer. If any of the components are<br />
not ok, the software doesn’t go ON.<br />
So, when we face this problem we have to<br />
check the 3 components. The procedure is<br />
as Follows:<br />
1· Check the Printer lights ON. Should be ON<br />
the following lights “POWER” and “READY”. If<br />
any other light, please fix it and Turn OFF and<br />
ON the Photo Booth.<br />
POWER<br />
Printer lights ON<br />
2· Check the Printer Connections. Power and USB, just 2 wires.<br />
USB<br />
printer<br />
Power<br />
READy<br />
3· Check the Control Board Serial Connection. (That is the common problem Point).<br />
(attached 2 pictures: Correct and Error “Please Wait”). This connection is very easy to lose<br />
during transport, or when we work at that area.<br />
86
Change language