Manual Evo 8.0 - PhotoBooth Digital Centre

hARD DRIVE ERROR
13.2 hARD DRIVE
This procedure is to check if the BIOS settings are correct for an Automatic
BOOT-DVD.
WARNING!!! This procedure is very dangerous and could cause a PC
Malfunction. Please read it carefully and follow all steps one to one.
1· Plug a Keyboard at the PC.
2· Turn ON the PC (or the whole Photo Booth).
3· When the ASRock screen appears, press “F10” several times until the “BIOS
SETUP UTILITY” appears on the screen. If it does not come up, and the
software continues uploading, then go back to the Step 2.
4· With the Keyboard arrows, move up to
the Storage Menu here we are going to
check the following thing:
· Device Configuration (step 5)
· Boot Order (step 6)
77