5 Graph Description Language (GDL) - Absint

–notune | –nofinetune
See finetuning (p. 71).
–springtune
This is an option for the hierarchical layout algorithms (see p. 117).
It switches the spring embedder fine-tuning phase on. It forces the nodes to be evenly distributed.
This is useful for undirected graphs.
–nospringtune This is the default setting.
This is an option for the hierarchical layout algorithms (see p. 117).
It explicitly switches the spring embedder fine-tuning phase off.
–manhattan | –orthogonal
See manhattan_edges (p. 79).
–nomanhattan | –noorthogonal This is the default setting.
See manhattan_edges (p. 79).
–smanhattan
See smanhattan_edges (p. 84).
–nosmanhattan This is the default setting.
See smanhattan_edges (p. 84).
–linseg
See linear_segments (p. 78).
–nolinseg This is the default setting.
See linear_segments (p. 78).
–linsegmax num default: maximum integer value
This option specifies the maximum length of a vertical linear segment, i.e. maximum number
of levels a linear segment crosses without any bending. See linear_segments (p. 78).
–prio
See priority_phase (p. 81).
–noprio
See priority_phase (p. 81).
–straight
See straight_phase (p. 85).
–nostraight
See straight_phase (p. 85).
–fstraight
See fstraight_phase (p. 72).
125