Operating Manual - SCHNIER Elektrostatik GmbH

9. Declaration of Conformity
Hersteller:
SCHNIER Elektrostatik GmbH
Bayernstrasse 13
D-72768 Reutlingen
Product: High Voltage Generator
Type / SCHNIER Art.-Nr.: smartPACK310c / 810364
Marking: II 3G/D T6 X
We declare that the product named above is in conformity with the following EU directives:
Applied harmonized standards:
Directive 94/9/EG (ATEX)
Directive 2006/42/EG (Machinery)
Directive 2004/108/EG (EMC)
The Directive 2006/95/EG (Low Voltage) is observed
regarding their safety objectives (s. Appendix I Nr 1.5.1
Directive 2006/42/EG)
EN 50176:2009 Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements
EN 50177:2009 Stationary electrostatic application equipment for ignitable coating powders - Safety requirements
EN 50223:2010 Stationary electrostatic application equipment for ignitable flock material - Safety requirements
EN 50348:2010 Stationary electrostatic application equipment for non-ignitable liquid coating material - Safety
requirements
EN ISO 12100-1:2003/A1:2009 Safety of machinery - General principles for design -
Part 1: Basic terminology, methodology (ISO 12100-1:2003) + Amendment 1
EN ISO 12100-2:2003/A1:2009 Safety of machinery - General principles for design –
Part 2: Technical principles - (ISO 12100-2:2003)+ Amendment 1
EN 60204-1:2006/A1:2009 Safety of machinery - Electrical equipment of machines -
Part 1: General requirements (IEC 60204-1:2005, modified + Amendment 1
EN 61000-6-2:2005 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial
environments
EN 61000-6-4:2007 Electromagnetic compatibility (EMC) – Part 6-4: Generic standards - Emission standard
for industrial environments
Rommelsbach 20.05.2011
Olav Schnier (Geschäftsführer)
Operating Instructions 810364_BAL_EN120302 Stand 02.03.2012 Seite 25 von 25