FIERY E-5000/3000 SERVICE MANUAL

More documents

Recommendations

Info

MACHINE INSTALLATION 10. Select “Exit Setup”. CÓPIA NÃO CONTROLADA Exit Setup Server Setup Network Setup Printer Setup Main Menu/Cancel G889I503.WMF G878/G889 1-14 CÓPIA NÃO CONTROLADA SM
11. The system will reboot. The Fierydriven key will have no effect until after the system reboots. To confirm that the reboot was successful, press the Fierydriven key. The Fiery Menu screen will appear on the operation panel of the copier. MACHINE INSTALLATION 1.3.6 VERIFYING THE CONNECTION (LOCAL TEST PRINT) After you connect the Color Controller to the copier, print the Test Page and the Configuration Page to verify that the connection between the Color Controller and the copier is good. 1. Make sure that the copier is not in use. 2. Check the settings in the following table, and make sure that Letter or A4 paper is loaded in at least one of the paper trays of the copier. PS Setting Default Paper Size PCL Setting Paper Size for System Settings Setup Option “US” “Metric” “US” “Metric” Configuration Page requires… Letter A4 - - PS Test Page requires… Letter A4 - - PCL Test Page requires…. - - Letter A4 3. On the operation panel of the copier, press the Fierydriven key to access the printer initial menu screen. 4. Access the menu list. To do this, touch the “Main Menu/Cancel” key, and select “Print Pages”. 5. Print the following pages: • Configuration Page • PS Test Page • PCL Test Page CÓPIA NÃO CONTROLADA Server Name Idle XXXXXMB (Version) Main Menu/Cancel G889I504.WMF 6. Examine the quality of the test pages. • All patches should be visible, but it is acceptable if they are very faint in the 5% and 2% ranges. • Each patch set should show uniform gradation from patch to patch as the shade lightens from 100% to 0%. • Poor image quality may indicate that the copier needs service. For more information, see the documentation provided with the copier. SM 1-15 CÓPIA NÃO CONTROLADA G878/G889 Fiery E-<strong>5000</strong>/<strong>3000</strong> G878/G889
Page 1 and 2: CÓPIA NÃO CONTROLADA FIERY E-5000
Page 3 and 4: CÓPIA NÃO CONTROLADA It is the re
Page 5 and 6: WARNING CÓPIA NÃO CONTROLADA The
Page 7 and 8: CÓPIA NÃO CONTROLADA LEGEND PRODU
Page 9 and 10: Read this "Safety Information" care
Page 11 and 12: IMPORTANT SAFETY NOTICES PREVENTION
Page 13 and 14: CÓPIA NÃO CONTROLADA G878/G889 TA
Page 15 and 16: CÓPIA NÃO CONTROLADA 6.2.1 FLOW C
Page 17 and 18: 1. INSTALLATION CÓPIA NÃO CONTROL
Page 19 and 20: 1.2 INSTALLATION FLOW CHART Recomme
Page 21 and 22: 1.3.2 UNPACKING THE COLOR CONTROLLE
Page 23 and 24: MACHINE INSTALLATION 1.3.4 CONNECTI
Page 25 and 26: 4. Remove the controller box cover
Page 27 and 28: [B] Connecting the Color Controller
Page 29: If you selected “English” at th
Page 33 and 34: CÓPIA NÃO CONTROLADA INSTALLING O
Page 35 and 36: CÓPIA NÃO CONTROLADA INSTALLING O
Page 37 and 38: CÓPIA NÃO CONTROLADA START-UP, SH
Page 39 and 40: CÓPIA NÃO CONTROLADA START-UP, SH
Page 41 and 42: CÓPIA NÃO CONTROLADA RUNNING THE
Page 43 and 44: 3. REPLACEMENT 3.1 GENERAL CAUTION
Page 45 and 46: 3.3 COVER REMOVAL 3.3.1 SIDE COVER
Page 47 and 48: 3.4.2 DIAGNOSTIC LED BOARD [A]: 16-
Page 49 and 50: 3.4.6 MOTHERBOARD 1. Video board (
Page 51 and 52: Cooling assembly removal procedure:
Page 53 and 54: 4. SOFTWARE MAINTENANCE CÓPIA NÃO
Page 55 and 56: CÓPIA NÃO CONTROLADA RESTORING TH
Page 57 and 58: CÓPIA NÃO CONTROLADA SYSTEM SOFTW
Page 63 and 64: CÓPIA NÃO CONTROLADA PATCH INSTAL
Page 65 and 66: 5. TROUBLESHOOTING 5.1 OVERVIEW CÓ
Page 67 and 68: LED diagnostic code One of the foll
Page 69 and 70: LED diagnostic code Possible cause
Page 71 and 72: CÓPIA NÃO CONTROLADA ERRORS AND S
Page 75 and 76: 5.3.5 PRINTING PROBLEMS CÓPIA NÃO
Page 79 and 80: CÓPIA NÃO CONTROLADA TESTING THE
Page 81 and 82:
CÓPIA NÃO CONTROLADA BLOCK DIAGRA
Page 83 and 84:
6.2 PRINT DATA PROCESSING 6.2.1 FLO
Page 85 and 86:
7. SPECIFICATIONS 7.1 GENERAL SPECI
Page 87 and 88:
7.2 SUPPORTED PAPER SIZES CÓPIA N
show all

FIERY E-5000/3000 SERVICE MANUAL

Create successful ePaper yourself

Delete template?

Save as template?