Monorail Guidance Systems

Lubrication
Lubricant quantities The values in the tables, page 41 to page 44, are guide values.
They are valid for the following conditions:
■ operating duration 100%
■ C 0/P = 8
■ v =0,8 m/s
■ stroke 500 mm to 1000 mm
■ independent of mounting positions, 0° to 90°.
Precise values can only be determined in practice. Adequate
provision of lubricant is indicated by a visible, unbroken oil film at
the profile of the wipers.
Figure 1
Mounting position
Minimum oil quantity Q min
The minimum oil quantity Q min is valid for initial operation or for
resumed operation after machine standstill of more than 8 hours;
for values see tables, page 41 to page 44.
For initial operation, it is measured such that the oil ducts, rolling
elements and raceways will be adequately provided with lubricant.
40 PF 1 Schaeffler Group Industrial
0°
90°
207 097