Sinclair 2013-A PDF - Brownells

Cleaning Rod Guides
Sinclair Service Rifl e
Receiver Port
This cleaning aid is designed for service rifles chambered
in 243 Win, 308 Win, and 30-06 (M1, M1A, and
M-14’s). This receiver port inserts into your action and
plugs the chamber just like a rod guide. Solvents are
prevented from running down into the trigger group and
into the bedding. It can also be used as an access port
to apply more solvent prior to pulling your brush back
through the bore. This receiver port also keeps the bolt
in the open position and prevents you from ramming
your brush or jag into the bolt face.
#749-001-606SK $10.95
Service Rifle Receiver Port
O-Ring Replacement Kits
Replacement O-Ring Kit - 10 pack w/Tool
#749-000-644SK .17 caliber $5.95
#749-000-652SK .222, .223 Family 5.95
#749-000-653SK .22-.250, .243 5.95
#749-000-654SK
146 800-717-8211
.270, .308, .30-06 5.95
Sinclair Solvent Port
Sinclair solvent ports permit the user to
apply solvent to a brush, patch, or mop
without getting it all over the rifle or their
work area. Our solvent ports plug into
the end of your “old style” Sinclair cleaning
rod guides and seal with a silicone
O-ring. Each solvent port has an opening
where you can apply solvent directly onto
the cleaning implement being used. One
size port for .17 caliber thru 6.5 mm rod
guides, a second size for .270 caliber up
to .30 caliber and a third size for 8mm and
338 caliber. These solvent ports will fit all
Sinclair Rod Guides except for RG4A54
and RG4A5417 rimfire guides.
This Sinclair rod guide is the only one of its kind
for Contenders and Encore handguns/rifles. This
rod guide protects the cleaning rod and throat of
your barrel. Easy to use, this rod guide is inserted
into the chamber and then turned to lock into
place behind the extractor. Available for most
T/C barrels that are chambered for bottleneck
cartridges. Accepts our Sinclair Solvent Port. Not
for Icon rifl es.
T/C Contender and Encore Rod Guides $8.95 each
$6.95 each
T/C Contender and Encore Rod Guides
The O-rings on Sinclair bore guides, snouts for Sinclair All-Purpose Rod Guides, Solvent Ports and Chamber Plugs should be replaced
occasionally because solvents and use eventually wear them out. We use three sizes of O-rings only, so having some spares on hand
is not expensive. We sell them two ways: in 10 packs with a handy little tool that makes it super easy to install a new ring, or in 5
packs of just the rings (once you have the tool). 17 caliber and 222/223 family components use the same size rings but
require a different installation tool, so they are sold in two separate kits. The two larger size O-rings can be installed
fairly easily without the tool, though it makes installation so much easier that we think it’s well worth the small extra
investment. See the listing for Chamber Plugs on page 145 for the replacement chamber plug O-rings.
Replacement O-Rings - 5 pack (Rings only)
#749-000-178SK .17/.222/ .223 Family $2.95
#749-000-182SK .243 and .308 2.95
#749-000-183SK Magnums/Solvent Ports 2.95
#749-000-820SK
.17 Caliber to 6.5mm
#749-000-812SK
.270 Caliber to .30 Caliber
#749-000-767SK
8mm - .338 Caliber
Note: Not for use on
current Sinclair
O-Ring Rod Guides
#749-001-146SK 17 Rem
#749-001-160SK 22 Hornet
#749-001-135SK 22 and 6mm PPC, 220 Swift
#749-001-177SK 222, 223 Family
#749-001-148SK 22-250, 243 Win
#749-001-133SK 6/284, 6.5/284
#749-001-138SK 7 TCU
#749-001-150SK 270, 30-06, 308 Family
#749-001-149SK 30-30, 7-30 Wtrs
#749-001-136SK 300 Whisper
#749-001-129SK 300 Win Mag.
#749-001-140SK 35 Rem