Sinclair 2013-A PDF - Brownells

RCBS Powder
Bushings
RCBS
Lead Shot
Bushings
$6.95 Each
ITEM # LEAD SHOT BUSHING
#749-012-127SK 7
⁄8 Ounce #6
#749-012-128SK 1 Ounce #6
#749-012-129SK 11 ⁄8 Ounce #6
#749-012-130SK 1¼ Ounce #6
#749-012-131SK 13 ⁄8 Ounce #6
#749-012-132SK 1½ Ounce #6
#749-012-133SK 7
⁄8 Ounce #9
#749-012-134SK 1 Ounce #7½
#749-012-135SK 1 Ounce #8
#749-012-136SK 11 ⁄8 Ounce #7½
#749-012-137SK 11 ⁄8 Ounce #8
#749-012-138SK 11 ⁄8 Ounce #8½
#749-012-139SK 11 Each bushing number denotes the
size. For instance #372 has an inside
dimension of .372". Call or visit our
website to select a powder
bushing which most accurately
throws your favorite
powder.
$6.95 Each
ITEM # POWDER BUSHING
#749-012-140SK #354
#749-012-141SK #360
#749-012-142SK #366
#749-012-143SK SK#372
#749-012-144SK #381
#749-012-145SK #390
#749-012-146SK #396
#749-012-147SK #402
#749-012-148SK #408
#749-012-149SK #414
#749-012-150SK #420
#749-012-151SK #423
#749-012-152SK #426
#749-012-153SK #429
#749-012-154SK #432
#749-012-155SK #435
#749-012-156SK #438
#749-012-157SK #441
#749-012-158SK #444
#749-012-159SK #447
#749-012-160SK #450
#749-012-161SK #453
#749-012-162SK #456
#749-012-163SK #459
#749-012-164SK #462
#749-012-165SK #465
#749-012-166SK #468
#749-012-167SK #471
#749-012-168SK #474
#749-012-169SK #480
#749-012-170SK #486
#749-012-171SK #498
⁄8 Ounce #9
Shotshell Presses and Reloading Kit
RCBS Turret
Deluxe Reloading Kit
This well-equipped kit contains everything you need – except for dies, shell holder(s), and
components – to start loading with the rugged, versatile RCBS Turret Press. The detachable
turret head has six die stations for mounting standard 7/8”-14 dies. You can use the press like a single-stage
for batch loading, or you can rotate the turret and perform all the loading steps on a case before popping it
out as a loaded round. Speeds up reloading, but still gives you plenty of control over every step.
Kit also includes the latest edition of the Speer Reloading Manual, Uniflow powder measure, Model 5-0-2
mechanical scale, case lube kit, universal case loading block, folding hex wrench set, Primer Tray-2, and
powder funnel.
#749-013-712SK Turret Deluxe Reloading Kit $408.99
#749-010-593SK Spare Turret Head 44.99
RCBS Grand Progressive Shotshell
Reloading Press with Auto-Indexing
The eight-station auto indexing progressive shotshell press minimizes the
complexity and turns your shotshell reloading experience into an efficient,
consistent, and uniform process all with the stroke of a lever. Perfect for the
accomplished hunter or clay shooter who requires accuracy and precision,
loaded after load. With the upstroke of the ram, you’ll complete a round of
reloading functions with the exception of indexing, which occurs on the downstroke
of the ram.
Features
The Grand was engineered with smart technologies—including a “no hull” “no
powder or shot” capabilities to cut down on wasteful spillage. It features a
massive frame constructed of high-grade aluminum casting, steel rods, and
links. The 1½" diameter ram is connected to RCBS’s legendary Compound
Leverage System to deliver years of smooth operation. The large openings
in the frame give easy access to all of the 8 stations. It serves up a universal
case holder at every station to accept shells for either 12 or 20 gauge allowing
precise sizing of the metal portion of the hull down to the rim. A unique
steel sizing ring, not found on most presses, resizes high and low base hulls.
A handy, spring-loaded “tilt-out” wad guide makes feeding wads a breeze.
Both the 25 lb. shot and 1 lb. powder hoppers feature on/off and a forward
quick-drain system. Change out powder and shot bushings in less than one
minute. (See Powder and Shot bushing charts at left). The powder station is
located at the front of the press for fast and easy removal to measure a powder
charge, should you want to check it for accuracy. It has three settings: On,
Off, and Empty. To empty the powder or shot hoppers just attach the drain tube
and turn the measure to Empty. The Grand accepts RCBS or Hornady Powder and
Shot Bushings. Mounting The Grand to a solid bench press is easy with two sets of
mounting holes, three larger holes, or four small holes that can be integrated with
the RCBS Riser Stand (sold separate). Not for use with Black Powder.
#749-010-622SK The Grand 12 Gauge Shotshell Reloader $699.99
#749-010-611SK The Grand 20 Gauge Shotshell Reloader 651.99
#749-012-174SK The Grand Dust Cover 24.99
#749-010-612SK The Grand Riser Stand 29.99
www.sinclairintl.com 73