Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Sinclair</strong> Press Stand<br />
The <strong>Sinclair</strong> Wooden Reloading Press Stand is<br />
designed to hold 7 ⁄8"-14 reloading presses for<br />
field/range use or for home use when permanent<br />
mounting isn’t an option. Having a<br />
rock-soild mount for your press that's also<br />
mobile really adds a lot of versatility to<br />
your setup. It's great for tight work<br />
spaces - or if you simply want to<br />
keep your bench top clear when<br />
you're not actually doing reloading<br />
operations. Great for load<br />
testing at the range, too. The<br />
stand is constructed of solid birch<br />
plywood and reinforced with aluminum<br />
angles for structural support.<br />
The large footprint provides a stable<br />
base when clamped down with<br />
a c-clamp. No assembly required.<br />
Designed to accommodate the following<br />
presses: RCBS Rockchucker, Redding Boss<br />
and Big Boss, Hornady 007, and similar sized<br />
presses. User must mark and drill mounting holes in top plate with normal<br />
drill bit. Mounting bolts are not included as we don’t know what hole size<br />
you need for your press. The mounting plate has a drillable mounting<br />
surface of 4½" wide x 5½" deep.<br />
#749-006-972SK <strong>Sinclair</strong> Press Stand $69.99<br />
Skip’s Machine Die Shims<br />
This set of seven die shims for 7 ⁄8"-14 dies permits<br />
you to adjust your sizing die by a desired amount<br />
without loosening the die lock ring. The original<br />
setting is maintained by going back to the previous<br />
shim. Dies should be set up with a shim in place (.006<br />
or .007 is suggested for original set-up). Set includes shims<br />
.003, .004, .005, .006, .007, .008, and .010. Shims are notch<br />
marked for identification.<br />
#749-001-325SK Skip’s Machine Die Shims $12.49<br />
<strong>Sinclair</strong> Die Lock Ring Pliers<br />
Our <strong>Sinclair</strong> machined aluminum die lock ring pliers for Redding dies have<br />
been so popular with our customers that we have added pliers for Hornady<br />
Lock Rings, Lee Lock Rings and the new stainless steel <strong>Sinclair</strong> Lock Rings.<br />
The three pliers are color coded: Green – fits Redding die lock rings and the<br />
Redding decap retaining nut on top of their sizing dies, Red – fits Hornady<br />
lock rings<br />
and decap<br />
assembly<br />
lock nuts and<br />
Lee lock rings<br />
and decap lock<br />
nuts, Bronze – fits<br />
the new <strong>Sinclair</strong> lock<br />
rings and Redding<br />
decap assembly lock<br />
nuts. All three pliers prevent<br />
damage to lock rings<br />
and decap rod retaining<br />
nuts, and they all feature<br />
cushioned vinyl handles.<br />
#749-002-629SK Redding Die Lock Ring Pliers - Green $17.99<br />
#749-009-918SK Hornady/Lee Die Lock Ring Wrench - Red 17.99<br />
#749-011-546SK <strong>Sinclair</strong> Die Lock Ring Pliers - Bronze 18.99<br />
Reloading Equipment<br />
Bald Eagle Reloading Bench<br />
Laminated hardwood reloading bench is sturdy enough to mount your<br />
reloading press, yet its compact size won’t take up a lot of space in the<br />
reloading room or workshop. Offers nearly eight square feet of work<br />
surface with plenty of room for the press, scale, dies, and all of your other<br />
reloading accessories. Lower shelf provides storage space and is perfect for<br />
keeping extra dies, powder, brass, bullets, and those other small parts that<br />
always seem to be somewhere else when you need them. Work surface is<br />
54" long by 21" wide, and 36" tall. Lower shelf is 34¾" long by 14" wide.<br />
Some assembly required. Includes instructions and hardware.<br />
#749-012-359SK Bald Eagle Reloading Bench $319.99<br />
Hornady ® Lock-N-Load ® Light<br />
Strip<br />
This slim-profile LED light strip<br />
is great for reloaders who’d like<br />
additional light in their reloading<br />
area but are tight on space.<br />
The adhesive-backed strip conveniently<br />
mounts to any reloading<br />
press or anywhere on your workbench<br />
to help eliminate shadows,<br />
making quality checks easier and<br />
your work area safer. Plugs into<br />
a standard 110volt<br />
outlet.<br />
#100-012-025SK<br />
Lock-N-Load Light Strip $14.99<br />
Lyman Quick<br />
Slick Slick<br />
Spray Lube<br />
Lyman’s Quick Slick Spray Lube allows you to<br />
lubricate an entire block of cases in just seconds<br />
to facilitate faster, easier case sizing. The ergonomically<br />
designed 16 oz. spray bottle delivers a<br />
mess-free lube that dries quickly leaving a light,<br />
clear film. Easily wipes away after sizing.<br />
#749-101-826SK $19.95<br />
Lyman Quick Slick Spray Lube<br />
www.sinclairintl.com 77