Sinclair 2013-A PDF - Brownells

Sinclair Driver and Caseholders
The Sinclair Driver and
Caseholder system is designed
to hold and turn your case
while you are neck
turning, cleaning
case necks or case
mouth deburring.
The caseholders and
driver are machined
from stainless steel, and
the driver has a ¼" hex
shaft for use in power
screwdrivers or low speed drill motors. The driver is universal to the
Sinclair system and will work with all the caseholders. Our Universal
Caseholder enables you to use this system with our Sinclair Priming
Tool Shell Holders. Select the appropriate shell holders for your favorite
cartridges. The Universal Caseholder works with the same #749-002-
109 driver as our original caseholders, and it is available as a “kit” with
the Driver and Universal Caseholder, as a kit with the Sinclair Driver
and the three most popular caseholders (#1, #3 & #4) included, or
individually for those who already have a driver. Remember to order
the Sinclair Stainless Shell Holders for your Universal Caseholder if
you don’t already have them. This system is a great, inexpensive way
to speed up the neck turning process. Also works great for many other
case prep operations.
#749-002-109SK Sinclair Caseholder Driver $12.95
Caseholders - $14.95 each
#749-002-489SK #1 222, 223 Family
#749-002-494SK #2 22 PPC/6 PPC
#749-002-493SK #3 BR, 243, 6.5/284, 308, 30-06
#749-002-490SK #4 Belted Mags, WSM, Ultra Mags
#749-002-485SK #6 220 Swift
#749-011-519SK #7 338 Lapua Mag
#749-011-520SK #8 408 Cheytac
Available for 50 BMG on page 86
Lyman Magnum
Inertia Bullet Puller
Universal Caseholders
#749-003-251SK $21.95
Universal Caseholder Only
#749-013-387SK $49.99
Driver w/#1, #3 & #4 Caseholders
#749-011-486SK $29.95
Universal Caseholder/Driver Kit
Every Reloader
Should Have One
Of These Tools!
The Lyman Magnum Inertia Bullet Puller features a new head design
that works on small cases up to the largest Magnums. It will safely
remove a projectile from a loaded round without damage to the case
or bullet. The full sized molded handle with rubber insert provides a
comfortable and sure grip.
#749-010-225SK Lyman Magnum Inertia Bullet Puller $22.99
Quinetics Bullet Puller
Kinetic style bullet puller for removing bullets from loaded centerfire
cartridges. Does not damage the components.
#749-002-687SK Quinetics Bullet Puller $17.95
Neck Turning and Bullet Pullers
RCBS Case Neck Turner
Attachments
RCBS offers two neck turner attachments that work
with the Trim Pro Manual Case Trimmer.
The neck turner attachments
each have a cutter unit that supports
the cartridge case neck
with a caliber specific
pilot/reamer (see chart)
while cutting. The pilot/
reamer enables the user to
turn both the inside
and outside of the
case neck simultaneously.
The RCBS
Neck Turner w/Auto
Feed attachment option allows for smooth
and even advancement of the cutter with
each turn of the trimmer handle. Pilot/
reamers are sold separately.
*NOTE: Not to be used with the
Trim Pro Power Case Trimmer.
#749-007-124SK $79.99
Case Neck Turner w/Auto Feed
#749-005-407SK $39.95
Case Neck Turner
See Chart $10.95
Pilot/Reamer
#749-005-407
#749-007-124
Pilot/Neck Reamers: $10.95
ITEM # CALIBER
#749-001-453SK .17 Cal
#749-001-452SK .20 Cal
#749-001-500SK .223 Cal
#749-001-501SK .6mm/243 Cal
#749-001-454SK .25 Cal
#749-001-502SK 6.5mm Cal
#749-001-455SK .270 Cal
#749-001-456SK 7mm
#749-001-535SK .30 Cal
#749-001-457SK 8mm
#749-001-458SK .338 Cal
#749-001-459SK .35 Cal
#749-001-460SK .375 Cal
Forster Hand-Held Neck Turner
Forster’s easy-to-use hand-held neck turning tool helps you take the next step
toward cartridge-to-cartridge consistency. It features a carbide cutter with a
micrometer-style adjustment knob for precise material removal to give cases
consistent wall thickness that improves bullet-to-bore alignment. The aluminum
holder retains the case firmly with a simple turn of the knob; holds up to .592"
base diameter. Large case holder available for cases from .593" to .812" base
diameter. Requires a pilot that’s specific to the case
mouth diameter; sold separately, see table below.
Pilots are precision-ground .002" to .0025" smaller
than the bullet diameter.
#749-012-890SK Hand-Held Neck Turner $61.99
#749-012-891SK Large Case Holder 15.99
Neck Turner Pilots $10.99 each
ITEM # CALIBER PILOT DIA.
#749-012-893SK 17 .1685
#749-012-894SK 20 .2015
#749-009-577SK 22 .221
#749-009-583SK 243/6mm .2395
#749-012-897SK 257/6.5mm .2545
#749-012-898SK 6.5mm .2615
#749-012-899SK 6.8mm .2745
#749-012-900SK 7mm .2815
#749-009-578SK 30/7.62mm .305
#749-012-902SK 32 .3085
#749-009-579SK 8mm .320
#749-012-904SK 333 .3305
#749-012-905SK 338 .3355
#749-012-906SK 358 .3355
#749-009-580SK 375 .372
#749-012-908SK 40/10mm .397
#749-012-910SK 40/10mm .402
#749-012-911SK 410 .407
ITEM # CALIBER PILOT DIA.
#749-012-912SK 416 .413
#749-012-913SK 419 .419
#749-012-914SK 430 .427
#749-012-915SK 45 .449
#749-012-916SK 45/454 .452
#749-012-917SK 458 .455
#749-012-918SK 475 .471
#749-012-919SK 480 .480
#749-012-920SK 50 .5015
#749-012-921SK 50 .5065
#749-012-922SK 50 .5095
www.sinclairintl.com 27