Sinclair 2013-A PDF - Brownells

500 FREE BULLETS
with purchase of a
Lock-N-Load Classic Reloading Kit
ASK FOR DETAILS
Lyman Expert Kit “Deluxe”
Lyman Expert Kit “Deluxe” features the Crusher single-station O-frame
press for precision reloading of pistol and rifle cartridges. The ironframed
press is built for years of service with hardened and ground
linkage pins and retaining rings for smooth, tight operation. The base
has 14 square inches of machined flat surface, with three bolt mounting
holes for secure mounting on your bench. Ready for any standard
7 ⁄8" x 14 dies of your choice. Kit includes a 1,000 grain digital scale,
#55 powder measure, universal case trimmer with 9 pilots, case lube
kit, primer catcher, extra decapping pins, deburring tool, primer tray,
auto primer feed, universal priming arm, powder funnel, and a 7 ⁄8" x 14
adapter mount to install the powder measure in the press. Also includes
the latest edition of the Lyman Reloading Handbook. Scale runs on a 9V
battery or using the included AC adapter, available in 115V or 230V.
#749-012-608SK Crusher Expert Kit “Deluxe” - 115V $519.95
#749-012-609SK Crusher Expert Kit “Deluxe” - 230V 530.00
72 800-717-8211
Reloading Kits
Hornady Lock-N-Load Classic
Reloading Kit
The Hornady Lock-N-Load Classic Reloading Kit comes with everything needed
to turn out high-quality, accurate handloads. The kit includes the “Hornady
Handbook of Cartridge Reloading” manual, one of our favorites. Comes with
everything pictured, plus complete instructions.
The trademark Lock-N-Load bushing technology that Hornady incorporates
will enable reloaders to adjust their dies and lock the bushings into place
for consistent reloads every time. Switch reloading dies to a new caliber and
begin reloading in seconds. No need for multiple presses, turrets, etc. Just
install the bushings to each reloading die, adjust and leave them in place for
“quick change” capability.
The Hornady Lock-N-Load Classic Reloading Kit includes the following: Lock-
N-Load Classic single-stage press, Lock-N-Load Powder Measure, The 8th
Edition Hornady Handbook of Cartridge Reloading, Three Lock-N-Load Die
Bushings, Positive Priming System, Hand-Held Priming Tool, Chamfering
and Deburring Tool, Electronic Scale, Primer Catcher, Primer Turning Plate
and One Shot Case Lube.
#749-009-855SK Hornady Lock-N-Load Classic Reloading Kit $324.99
Hornady Lock-N-Load Classic Deluxe
Reloading Kit
If it’s more than just the basics you’re looking for, consider the all-inclusive
Hornady Lock-N-Load Classic Kit Deluxe. Perfect for the reloading newcomer,
the Deluxe kit eliminates the need to search for the specific, individual tools
necessary to produce top-quality, precision handloads.
It features all of the premium products included in the Classic kit, plus the following:
powder trickler and funnel, powder measure stand, pistol rotor and
metering assembly, sure-loc lock ring 6-pack, shellholder pack 1, 2, 5, 16, 35,
kinetic bullet puller, cartridge OAL gauge, and steel dial caliper.
#749-015-178SK Hornady Lock-N-Load Classic Kit Deluxe $489.99
Hornady Lock-N-Load
Ammo Plant
This professional grade loading system turns
your workbench into a high-volume home
ammunition factory. Kit includes a Lock-
N-Load Auto-Progressive (AP) 5-stage
progressive press, bullet feeder, case
feeder, and case-activated powder
drop. You’ve never loaded precision
handgun or rifle ammunition this
quickly and efficiently.
Includes: Lock-N-Load AP Die Bushing
10-Pack, spring case retainer 3-Pack (2),
large cartridge catcher (3), large primer
pickup tube (3), small primer pickup tube
(3), primer slide spring (2) pistol and rifle
insert/rotor, Powder Cop (checks dropped
charges) and die wrench.
#749-015-199SK $1,161.99
Hornady Lock-N-Load
Ammo Plant – 110 Volt