Control Point® Addendum - DICKEY-john Corporation
Control Point® Addendum - DICKEY-john Corporation
Control Point® Addendum - DICKEY-john Corporation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Air Temperature Sensor<br />
This sensor is used to monitor the air temperature and notify the driver of air temperature changes. There<br />
are three temperature alarm settings that can be set to alert the driver. The air temperature sensor will be<br />
connected to the Road Watch Adapter (466492000S1). The Road Watch Adapter is connected to the main<br />
harness on the lead labeled TEMPERATURE or to the mating connector in the adapter harness<br />
(466492040S1) on earlier versions of <strong>Control</strong> Point harnesses. When enabled, the air temperature will<br />
replace the date in the lower left side of the operate screen. The configuration for the air temperature sensor<br />
is found under Miscellaneous (F12), More (6), Air Temperature Sensor (3).<br />
CONFIGURATION<br />
The initial air temperature screen has a YES or NO option for the sensor configuration. Press N for NO and Y<br />
for YES. The default for the road temperature is NO.<br />
If NO, the following screen will appear.<br />
11001-1258-200311<br />
<strong>Control</strong> Point version 6.40 software addendum 9