Telecommunication Copper Cables - PENGG KABEL GmbH

Telecommunication-Outdoor Cables
Foam-PE-insulated, local telecommunication cable A-02Y(L)2Y ..x2x... STIII BD
conductor diameter 0.6 mm conductor diameter 0.8 mm
Type number of outer diameter weight outer diameter weight
double cores approx. mm approx. kg/km approx. mm approx. kg/km
A-02Y(L)2Y 2x2x.. STIII BD 2 7.1 37 7.7 63
A-02Y(L)2Y 4x2x.. STIII BD 4 9.5 67 10.9 96
A-02Y(L)2Y 6x2x.. STIII BD 6 10.3 106 12.0 141
A-02Y(L)2Y 10x2x.. STIII BD 10 11.7 137 13.9 202
A-02Y(L)2Y 20x2x.. STIII BD 20 14.6 221 17.1 334
A-02Y(L)2Y 30x2x.. STIII BD 30 16.2 292 19.8 464
A-02Y(L)2Y 40x2x.. STIII BD 40 18.0 366 22.1 590
A-02Y(L)2Y 50x2x.. STIII BD 50 19.5 436 24.6 728
A-02Y(L)2Y 70x2x.. STIII BD 70 22.2 580 28.1 971
A-02Y(L)2Y 100x2x.. STIII BD 100 26.0 808 32.6 1319
A-02Y(L)2Y 120x2x.. STIII BD 120 28.0 951 35.6 1587
A-02Y(L)2Y 150x2x.. STIII BD 150 30.6 1156 39.1 1920
A-02Y(L)2Y 200x2x.. STIII BD 200 35.0 1511 44.3 2519
A-02Y(L)2Y 250x2x.. STIII BD 250 39.9 1890 50.6 3180
A-02Y(L)2Y 300x2x.. STIII BD 300 43.1 2220 55.7 3840
A-02Y(L)2Y 350x2x.. STIII BD 350 46.8 2600 60.1 4440
Application
In all kinds of operating premises (excepted locations with special protection
demands - like in fire or highly combustible premises); e.g. for local area networks
of the telecom, as station communication cables and for small telephone
networks of industry, traffic and public utilities.
Construction
Conductor: solid, bare copper wire Ø 0.6 / 0.8 mm
Insulation: foam-PE (02Y)
Core colours: basic colours of quads: RD, GN, GY, YE, WT
Group mark: side circuit 1 a-core
side circuit 1 b-core
side circuit 2 a-core
side circuit 2 b-core
Cable make up: 4 cores twisted to quads (STIII), 5 quads cabled
together to basic units (BD), tracer units and tracer
main units are marked with an open red helix in each
layer, all other basic and main units are identified with
an open white or natural coloured helix. 5 basic units
cabled together to main units (from 150 DC upwards).
Basic-/main units cabled together in layers to cable
core. Cable core wrapping of plastic tape.
Sheath: PE double-coated aluminium foil bonded with the PEouter
sheath ((L)2Y), black
Laying
suitable for underground installation and pulling into conduits, ducts
Marking
Note
other number of pairs or conductor diameters on request
C42
Ø
0.6
mutual capacitance
Ø
0.8
dimension of
conductor
cable elements
Technical Details (at 20°C)
standard similar to VDE 0816/part 1
conductor diameter 0.6 0.8 mm
loop resistance ≤ 130 ≤ 73.2 Ω/km
insulation resistance
mutual capacitance
≥ 5 ≥ 5 GΩkm
(at f=800Hz) 100% ≤ 42 ≤ 42 nF/km
95 % ≤ 40 ≤ 40 nF/km
80 % ≤ 38 ≤ 38 nF/km
capacitance unbalance k1 (at f=800Hz) 100% ≤ 800 ≤ 800 pF/300m
98 % ≤ 400 ≤ 400 pF/300m
capacitance unbalance k9-12 (at f=800Hz) 100% ≤ 300 ≤ 300 pF/300m
98 % ≤ 100 ≤ 100 pF/300m
operating voltage (peak value) ≤ 225 ≤ 225 V
dielectric strength conductor/conductor 500 500 V/50Hz
conductor/shield 2000 2000 V/50Hz
temperature range
during installation -20 up to +50°C
for stationary conditions up to +70 °C
Telecommunication Copper Cables • 09/2012 • © by PENGG KABEL GmbH • Subject to technical alterations 13
DC
n
number of
double cores
filling
overall shield,
armouring