Library manual M238 system functions | 2 MB - BERGER - POSITEC

More documents

Recommendations

Info

M238 PLC System Library Data Types 3.1 PLC_R/W System Variables Data Types Overview This section lists and describes the System Variables Data Types included in the PLC_R and PLC_W structures. What’s in this Section? This section contains the following topics: Topic Page PLC_R_STATUS: Controller Status Codes 53 PLC_R_APPLICATION_ERROR: Detected Application Error Status Codes 54 PLC_R_BOOT_PROJECT_STATUS: Boot Project Status Codes 55 PLC_R_IO_STATUS: I/O Status Codes 56 PLC_R_STOP_CAUSE: from RUN State to Other State Transition Cause Codes 57 PLC_W_COMMAND: Control Command Codes 58 52 EIO0000000364 04/2012
PLC_R_STATUS: Controller Status Codes M238 PLC System Library Data Types Enumerated Type Description The PLC_R_STATUS enumeration data type contains the following values: Enumerator Value Comment PLC_R_EMPTY 00 hex Controller is not programmed. PLC_R_STOPPED 01 hex Controller is stopped. PLC_R_RUNNING 02 hex Controller is running. PLC_R_HALT 04 hex Controller is in a HALT state. (see the Controller State Diagram in your controller Programming Guide). PLC_R_BREAKPOINT 08 hex Controller has paused at breakpoint. EIO0000000364 04/2012 53
Page 1 and 2: EIO0000000364.06 Modicon M238 Logic
Page 3 and 4: Table of Contents Safety Informatio
Page 5 and 6: Important Information NOTICE Safety
Page 7 and 8: At a Glance Document Scope Validity
Page 9 and 10: Overview Modicon M238 Logic Control
Page 11 and 12: Understanding System Variables Intr
Page 13 and 14: Using System Variables Introduction
Page 15 and 16: 1.2 PLC_R and PLC_W Structures Over
Page 17 and 18: %MW Var Name Type Comment 60024 i_w
Page 19 and 20: 1.3 SERIAL_R and SERIAL_W Structure
Page 21 and 22: SERIAL_W[0..1]: Serial Line Read /
Page 25 and 26: GetBatteryLevel: Returns Remaining
Page 27 and 28: GetEventsNumber: Returns the Number
Page 29 and 30: Example M238 System Functions This
Page 31 and 32: GetLastStopCause: Returns the Cause
Page 33 and 34: GetLocalIOStatus: Returns the Embed
Page 35 and 36: GetPlcFault: Returns Detected Error
Page 37 and 38: M238 System Functions I/O Expansion
Page 39 and 40: Example M238 System Functions To ob
Page 41 and 42: M238 System Functions GetShortCutSt
Page 43 and 44: IsFirstMastCycle: Indicates if Cycl
Page 45 and 46: M238 System Functions IsFirstMastWa
Page 47 and 48: InhibitBatLowLed: Disables or Re-en
Page 49 and 50: SetRTCDrift: Adjust the Real Time C
Page 51: Overview Modicon M238 Logic Control
Page 55 and 56: PLC_R_BOOT_PROJECT_STATUS: Boot Pro
Page 57 and 58: M238 PLC System Library Data Types
Page 59 and 60: 3.2 System Functions Data Types Ove
Page 67 and 68: HOUR: SetRTCDrift Function Hour Par
Page 69 and 70: Modicon M238 Logic Controller EIO00
Page 73 and 74: How to Use a Function or a Function
Page 75 and 76: Function and Function Block Represe
Page 77 and 78: How to Use a Function or a Function
Page 79 and 80: Function and Function Block Represe
Page 81 and 82: 1-phase counter 2-phase counter BOO
Page 83 and 84: expansion bus E Glossary The expans
Page 85 and 86: Modbus NEMA PLC PLI POU PTO M The M
Page 87 and 88: U unlocated variable An unlocated v
Page 89 and 90: Modicon M238 Logic Controller Index
Page 91 and 92: System Variable PLC_R, 16 PLC_W, 18

Library manual M238 system functions | 2 MB - BERGER - POSITEC

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?