Library manual M238 system functions | 2 MB - BERGER - POSITEC

More documents

Recommendations

Info

M238 PLC System Library Data Types LOCAL_IO_GEN_STATUS: GetLocalIOStatus Function Output Codes Enumerated Type Description The LOCAL_IO_GEN_STATUS enumeration data type contains the status of local I/Os with the following values: Enumerator Value Description LOCAL_IO_OK 00 hex Inputs / Outputs are operational. LOCAL_IO_NO_INIT 01 hex Wrong I/O configuration parameters detected. LOCAL_IO_COM_LOST 02 hex Communication error with Coprocessor. The embedded I/O are not updated. LOCAL_IO_CONF_FAULT 03 hex Wrong I/O configuration parameters detected. 64 EIO0000000364 04/2012
M238 PLC System Library Data Types RIGHTBUS_GET_STATUS: GetRightBusStatus Function Parameter Codes Enumerated Type Description The enumeration data type contains the following values: Enumerator Value Description RIGHTBUS_GET_GEN_STATUS 00 hex Parameter for expansion bus configuration diagnostic RIGHTBUS_GET_STATUS1 01 hex Parameter for expansion bus Module 1 diagnostic RIGHTBUS_GET_STATUS2 02 hex Parameter for expansion bus Module 2 diagnostic RIGHTBUS_GET_STATUS3 03 hex Parameter for expansion bus Module 3 diagnostic RIGHTBUS_GET_STATUS4 04 hex Parameter for expansion bus Module 4 diagnostic RIGHTBUS_GET_STATUS5 05 hex Parameter for expansion bus Module 5 diagnostic RIGHTBUS_GET_STATUS6 06 hex Parameter for expansion bus Module 6 diagnostic RIGHTBUS_GET_STATUS7 07 hex Parameter for expansion bus Module 7 diagnostic NOTE: For more information on using the RIGHTBUS_GET_STATUS parameter type, refer to the function GetRightBusStatus (see page 36). EIO0000000364 04/2012 65
Page 1 and 2:
EIO0000000364.06 Modicon M238 Logic
Page 3 and 4:
Table of Contents Safety Informatio
Page 5 and 6:
Important Information NOTICE Safety
Page 7 and 8:
At a Glance Document Scope Validity
Page 9 and 10:
Overview Modicon M238 Logic Control
Page 11 and 12:
Understanding System Variables Intr
Page 13 and 14: Using System Variables Introduction
Page 15 and 16: 1.2 PLC_R and PLC_W Structures Over
Page 17 and 18: %MW Var Name Type Comment 60024 i_w
Page 19 and 20: 1.3 SERIAL_R and SERIAL_W Structure
Page 21 and 22: SERIAL_W[0..1]: Serial Line Read /
Page 23 and 24: Overview Modicon M238 Logic Control
Page 25 and 26: GetBatteryLevel: Returns Remaining
Page 27 and 28: GetEventsNumber: Returns the Number
Page 29 and 30: Example M238 System Functions This
Page 31 and 32: GetLastStopCause: Returns the Cause
Page 33 and 34: GetLocalIOStatus: Returns the Embed
Page 35 and 36: GetPlcFault: Returns Detected Error
Page 37 and 38: M238 System Functions I/O Expansion
Page 39 and 40: Example M238 System Functions To ob
Page 41 and 42: M238 System Functions GetShortCutSt
Page 43 and 44: IsFirstMastCycle: Indicates if Cycl
Page 45 and 46: M238 System Functions IsFirstMastWa
Page 47 and 48: InhibitBatLowLed: Disables or Re-en
Page 49 and 50: SetRTCDrift: Adjust the Real Time C
Page 53 and 54: PLC_R_STATUS: Controller Status Cod
Page 55 and 56: PLC_R_BOOT_PROJECT_STATUS: Boot Pro
Page 57 and 58: M238 PLC System Library Data Types
Page 59 and 60: 3.2 System Functions Data Types Ove
Page 61 and 62: M238 PLC System Library Data Types
Page 63: M238 PLC System Library Data Types
Page 67 and 68: HOUR: SetRTCDrift Function Hour Par
Page 69 and 70: Modicon M238 Logic Controller EIO00
Page 73 and 74: How to Use a Function or a Function
Page 75 and 76: Function and Function Block Represe
Page 77 and 78: How to Use a Function or a Function
Page 79 and 80: Function and Function Block Represe
Page 81 and 82: 1-phase counter 2-phase counter BOO
Page 83 and 84: expansion bus E Glossary The expans
Page 85 and 86: Modbus NEMA PLC PLI POU PTO M The M
Page 87 and 88: U unlocated variable An unlocated v
Page 89 and 90: Modicon M238 Logic Controller Index
Page 91 and 92: System Variable PLC_R, 16 PLC_W, 18
show all

Library manual M238 system functions | 2 MB - BERGER - POSITEC

Create successful ePaper yourself

Delete template?

Save as template?