Laborübung WAN - Cisco Agenda
Laborübung WAN - Cisco Agenda
Laborübung WAN - Cisco Agenda
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ITTK - <strong>WAN</strong> - WS2006<br />
<strong>Cisco</strong> Labor Day 1 (V1.6)<br />
Verify and Save your Configuration<br />
Verify using the following commands:<br />
sh running-config<br />
sh interfaces<br />
wait for interface coming up and running -> serial up, line protocol up<br />
sh cdp neighbors<br />
cdp … <strong>Cisco</strong> Discovery Protocol<br />
you should see all directly <strong>WAN</strong>-connected routers of your workgroup<br />
If everything is all right save it to NVRAM:<br />
copy running-config startup-config (copy run start)<br />
sh startup-config (sh start)<br />
© 2006, D.I. Manfred Lindner <strong>Cisco</strong> Lab <strong>WAN</strong> D1, v1.6 23<br />
<strong>Agenda</strong><br />
1) Lab Overview<br />
2) <strong>Cisco</strong> Basics<br />
3) IOS-CLI Introduction<br />
4) Lab Topology <strong>WAN</strong><br />
5) Lab Topology LAN and Basic IP Addressing (Classful)<br />
6) RIPv1 Configuration<br />
7) RIPv2 Configuration (Classless) and NTP<br />
8) RIP Convergence Test<br />
9) Default Routing<br />
10) Advanced IP Addressing (VLSM)<br />
11) Lab Wrap up<br />
12)Topology Slides Day1<br />
© 2006, D.I. Manfred Lindner <strong>Cisco</strong> Lab <strong>WAN</strong> D1, v1.6 24<br />
© 2006, D.I. Manfred Lindner<br />
Page 1 - 12